Installation Guide

PRODUCT & ORDERING INFO 25
Schluter
®
-KERDI-KERECK-F
Schluter
®
-KERDI-FLEX
KERDI-FLEX is a flexible polyethylene waterproofing strip used to seal movement joints over DITRA-HEAT in specialty
applications where large movements are expected (e.g., over expansion joints).
KERDI-KERECK-F are preformed, seamless corners made of KERDI for waterproofing inside and outside corners.
Waterproofing strip for use above movement joints
Item No. Width Length Thickness
FLEX 125/5M 5" - 125 mm 16
' 5" - 5 m 12 mil
FLEX 250/5M 10" - 250 mm 16 ' 5" - 5 m 12 mil
FLEX 125/30 5" - 125 mm 98 ' 5" - 30 m 12 mil
FLEX 250/30 10" - 250 mm 98 ' 5" - 30 m 12 mil
Note: 1 mil = 1 one-thousandth of an inch
Waterproofing for corners
Item No. Thickness Packaging
KERECK/FI 2 4 mil 2 Inside corners
KERECK/FI 10 4 mil 10 Inside corners
KERECK/FA 2 4 mil 2 Outside corners
KERECK/FA 10 4 mil 10 Outside corners
Note: 1 mil = 1 one-thousandth of an inch
Schluter
®
-KERDI-BAND
KERDI-BAND is a waterproofing strip used to seal butt joints and floor/wall connections with the KERDI and
DITRA membranes.
Waterproofing strip
Item No. Width Length Thickness
KEBA 100/125/5M 5" - 125 mm 16
' 5" - 5 m 4 mil
KEBA 100/125/10M 5" - 125 mm 33 ' - 10 m 4 mil
KEBA 100/185/5M 7-1/4" - 185 mm 16 ' 5" - 5 m 4 mil
KEBA 100/250/5M 10" - 250 mm 16
' 5" - 5 m 4 mil
KEBA 100/125 5" - 125 mm 98
' 5" - 30 m 4 mil
KEBA 100/185 7-1/4" - 185 mm 98
' 5" - 30 m 4 mil
KEBA 100/250 10" - 250 mm 98 ' 5" - 30 m 4 mil
Note: 1 mil = 1 one-thousandth of an inch
Schluter
®
-DITRA-HEAT-E-KIT
The DITRA-HEAT-E-KIT is an all-inclusive package containing the DITRA-HEAT uncoupling membrane, heating
cable, and programmable thermostat.
Kit containing all necessary components
Item No. DHE K 120 40 DHE K 120 56
Matting 5 sheets – 43.1 ft
2
(4.0 m
2
) 7 sheets – 60.3 ft
2
(5.6 m
2
)
Heating cable 88' 3" – 26.7 ft
2
(26.9 m – 2.5 m
2
) 124' 0" - 37.5 ft
2
(37.8 m - 3.5 m
2
)
Thermostat 1 – white, programmable 1 – white, programmable
Schluter
®
-KERDI-FIX
BW
Bright
white
G
Grey
*Color Codes
KERDI-FIX is a single-component sealing and bonding compound with a silane-modified polymer base. It is odor-neutral,
UV- and weather-resistant, and contains no solvents. KERDI-FIX is elastomeric and bonds well to most materials, such
as wood, stone, concrete, metal, glass, and many plastics. KERDI-FIX is suitable for the bonding of KERDI waterproofing
membrane to vertical sections of floor/wall transitions that will not accept a bond to unmodified thin-set mortar.
Sealing and bonding compound
Item No. Description
KERDIFIX/color* Cartridge – 9.81 oz (290 ml)
Schluter
®
-DITRA-ROLLER
Used to embed DITRA membranes in the bond coat during membrane installation. The lightweight DITRA-ROLLER
features a 14-1/2" (37 cm) wide roller and a shelf for placing 50 to 75 lbs of weight (e.g., bag of thin-set mortar or
grout, box of tiles, etc.). Between uses, it can be conveniently disassembled for transport and storage.
Used to embed uncoupling membranes in the bond coat
Item No. Width
DIRO 14-1/2" (37 cm)
Schluter
®
-DITRA-HEAT
Schluter
®
-DITRA-HEAT-E-HK