Installation Guide

Schluter
®
-KERDI-FLEX
KERDI-FLEX is a flexible polyethylene waterproofing strip used to seal movement joints over DITRA-HEAT in specialty
applications where large movements are expected (e.g., over expansion joints).
Waterproofing strip for use above movement joints
Item No. Width Length Thickness
FLEX 125/5M 5" - 125 mm 16
' 5" - 5 m 12 mil
FLEX 250/5M 10" - 250 mm 16 ' 5" - 5 m 12 mil
FLEX 125/30 5" - 125 mm 98 ' 5" - 30 m 12 mil
FLEX 250/30 10" - 250 mm 98 ' 5" - 30 m 12 mil
Note: 1 mil = 1 one-thousandth of an inch
Schluter
®
-KERDI-KERECK-F
KERDI-KERECK-F are preformed, seamless corners made of KERDI for waterproofing inside and outside corners.
Waterproofing for corners
Item No. Thickness Packaging
KERECK/FI 2 4 mil 2 Inside corners
KERECK/FI 10 4 mil 10 Inside corners
KERECK/FA 2 4 mil 2 Outside corners
KERECK/FA 10 4 mil 10 Outside corners
Note: 1 mil = 1 one-thousandth of an inch
Schluter
®
-KERDI-FIX
BW
Bright
white
G
Grey
*Color Codes
KERDI-FIX is a single-component sealing and bonding compound with a silane-modified polymer base. It is odor-neutral,
UV- and weather-resistant, and contains no solvents. KERDI-FIX is elastomeric and bonds well to most materials, such
as wood, stone, concrete, metal, glass, and many plastics. KERDI-FIX is suitable for the bonding of KERDI waterproofing
membrane to vertical sections of floor/wall transitions that will not accept a bond to unmodified thin-set mortar.
Sealing and bonding compound
Item No. Description
KERDIFIX/color* Cartridge – 9.81 oz (290 ml)
Schluter
®
-DITRA-ROLLER
Schluter
®
-DITRA-HEAT/-DITRA-XL-TROWEL
Used to embed DITRA membranes in the bond coat during membrane installation. The lightweight DITRA-ROLLER
features a 14-1/2" (37 cm) wide roller and a shelf for placing 50 to 75 lbs of weight (e.g., bag of thin-set mortar or
grout, box of tiles, etc.). Between uses, it can be conveniently disassembled for transport and storage.
The DITRA-HEAT/-DITRA-XL-TROWEL features a 1/4" x 1/4" (6 mm x 6 mm) square-notched design, and is used
to install the DITRA-HEAT and DITRA-XL membranes.
Used to embed uncoupling membranes in the bond coat
Item No. Width
DIRO 14-1/2" (37 cm)
Trowel used to install DITRA-HEAT and DITRA-XL membranes
Item No. Notch Size Packaging
TRL-DHXL 1/4" x 1/4" (6 mm x 6 mm)
1 unit
TRL-DHXL6 1/4" x 1/4" (6 mm x 6 mm)
6 units
30 PRODUCT & ORDERING INFO
Schluter
®
-KERDI-BAND
KERDI-BAND is a waterproofing strip used to seal butt joints and floor/wall connections with the KERDI and
DITRA membranes.
Waterproofing strip
Item No. Width Length Thickness
KEBA 100/125/5M 5" - 125 mm 16
' 5" - 5 m 4 mil
KEBA 100/125/10M 5" - 125 mm 33 ' - 10 m 4 mil
KEBA 100/185/5M 7-1/4" - 185 mm 16 ' 5" - 5 m 4 mil
KEBA 100/250/5M 10" - 250 mm 16 ' 5" - 5 m 4 mil
KEBA 100/125 5" - 125 mm 98
' 5" - 30 m 4 mil
KEBA 100/185 7-1/4" - 185 mm 98
' 5" - 30 m 4 mil
KEBA 100/250 10" - 250 mm 98 ' 5" - 30 m 4 mil
Note: 1 mil = 1 one-thousandth of an inch