Use and Care Manual

9
WALL AND COUNTERTOP PROFILES
Aluminum
= H
Aluminum
2.10 Schluter
®
-QUADEC
H =
mm - in.
Item No.
Satin
anodized
aluminum
(AE)
Polished
chrome
anodized
aluminum
(ACG)
Satin
nickel
anodized
aluminum
(AT)
Brushed
antique bronze
anodized
aluminum
(ABGB)
4.5 - 3/16 Q 45 AE Q 45 ACG Q 45 AT -
6 - 1/4 Q 60 AE Q 60 ACG Q 60 AT Q 60 ABGB
8 - 5/16 Q 80 AE Q 80 ACG Q 80 AT Q 80 ABGB
10 - 3/8 Q 100 AE Q 100 ACG Q 100 AT Q 100 ABGB
12.5 - 1/2 Q 125 AE Q 125 ACG Q 125 AT Q 125 ABGB
15 - 9/16 Q 150 AE - - -
20 - 3/4 Q 200 AE - - -
Accessories Item No.
End cap, outside/inside corner EV/ profile item number*
H =
mm - in.
Connector
for aluminum
profiles
6 - 1/4 V/Q 60
8 - 5/16 V/RO 80
10 - 3/8 V/RO 100
12.5 - 1/2 V/RO 125
Inside Corner Outside Corner
Note: The same corner piece can be used to produce
a 90° inside corner and a 90° outside corner. It can also
be used as an end cap.
How to order corners:
* To complete the item number for corners, add the corresponding profile
item number (e.g., EV/ Q 80 E).
Length supplied: 8' 2-1/2" — 2.5 m
2.10 Schluter
®
-QUADEC
Length = 3.05 m - 10'
H =
mm - in.
Item No.
Polished
chrome
anodized
aluminum
(ACG)
8 - 5/16 Q 80 ACG/300
10 - 3/8 Q 100 ACG/300
12.5 - 1/2 Q 125 ACG/300