Installation Guide

PRODUCT & ORDERING INFO 43
Intermediate placement
5-15/32" - 137 mm
2-1/4" -
57 mm
7/8" -
22 mm
7/8" -
22 mm
15/16" - 24 mm
Schluter
®
-KERDI-LINE
KERDI-LINE is a low profile linear floor drain specifically designed for bonded
waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at
intermediate locations in showers, wet rooms, and other applications that require
waterproofing and drainage. The floor can be sloped on a single plane to KERDI-LINE,
which enables the use of large-format tiles and creates interesting design opportunities.
KERDI-LINE consists of a formed stainless steel channel body and a grate assembly
that can be seamlessly adjusted to the thickness of the ceramic tile or stone covering
from 1/8" to 1" (3 mm to 25 mm). Grate assemblies are available in three designs:
closed, perforated, or tileable covering support.
Note: There are multiple selections to be made for this product. Start by selecting the
appropriate flange length then proceed to grate selection accordingly, keeping in mind
there are two frame heights with two grate options (A or B), and a frameless option (D).
KERDI-LINE linear floor drain
L =
in. - cm
L
1
=
in. - cm
Bonding flange Grate A Grate B Grate D
Center outlet Off-set outlet
Frame =
3/4" - 19 mm
Frame =
1-1/8" - 30 mm
Frame =
3/4" - 19 mm
Frame =
1-1/8" - 30 mm
For use
with bonding
flange with
center outlet
For use
with bonding
flange with
off-set outlet
20 - 50 22 - 55 KLV 60 E 50 - KLAR 19 EB 50 KLAR 30 EB 50 KLB 19 EB 50 KLB 30 EB 50 KLDRE 50 -
24 - 60 26 - 65 KLV 60 E 60 - KLAR 19 EB 60 KLAR 30 EB 60 KLB 19 EB 60 KLB 30 EB 60 KLDRE 60 -
28 - 70 30 - 75 KLV 60 E 70 KLVO 60 E 70 KLAR 19 EB 70 KLAR 30 EB 70 KLB 19 EB 70 KLB 30 EB 70 KLDRE 70 KLDRO E 70
32 - 80 34 - 85 KLV 60 E 80 KLVO 60 E 80 KLAR 19 EB 80 KLAR 30 EB 80 KLB 19 EB 80 KLB 30 EB 80 KLDRE 80 KLDRO E 80
36 - 90 38 - 95 KLV 60 E 90 KLVO 60 E 90 KLAR 19 EB 90 KLAR 30 EB 90 KLB 19 EB 90 KLB 30 EB 90 KLDRE 90 KLDRO E 90
40 - 100 42 - 105 KLV 60 E 100 KLVO 60 E 100 KLAR 19 EB 100 KLAR 30 EB 100 KLB 19 EB 100 KLB 30 EB 100 KLDRE 100 KLDRO E 100
44 - 110 46 - 115 KLV 60 E 110 KLVO 60 E 110 KLAR 19 EB 110 KLAR 30 EB 110 KLB 19 EB 110 KLB 30 EB 110 KLDRE 110 KLDRO E 110
48 - 120 50 - 125 KLV 60 E 120 KLVO 60 E 120 KLAR 19 EB 120 KLAR 30 EB 120 KLB 19 EB 120 KLB 30 EB 120 KLDRE 120 KLDRO E 120
52 - 130 54 - 135 KLV 60 E 130 - KLAR 19 EB 130 - KLB 19 EB 130 - KLDRE 130 -
56 - 140 58 - 145 KLV 60 E 140 - KLAR 19 EB 140 - KLB 19 EB 140 - KLDRE 140 -
60 - 150 62 - 155 KLV 60 E 150 - KLAR 19 EB 150 - KLB 19 EB 150 - KLDRE 150 -
64 - 160 66 - 165 KLV 60 E 160 - KLAR 19 EB 160 - KLB 19 EB 160 - KLDRE 160 -
68 - 170 70 - 175 KLV 60 E 170 - KLAR 19 EB 170 - KLB 19 EB 170 - KLDRE 170 -
72 - 180 74 - 185 KLV 60 E 180 - KLAR 19 EB 180
-
KLB 19 EB 180
-
KLDRE 180
-
KERDI-LINE is listed by ICC-ES (Report No. PMG-1204), UPC®, CSA, and NSF.
Note: Purchase bonding flange and grate assembly separately.
= H
3/8" -
10 mm
1-27/32" -
47 mm
2-29/32" - 74 mm
Closed (A)
2" - 50 mm
Frameless Tileable (D) Patent pending
= H
3/8" -
10 mm
2-1/8" - 54 mm
2-29/32" - 74 mm
Perforated (B)
Wall placement
4-23/32" - 120 mm
2-1/4" -
57 mm
7/8" -
22 mm
7/8" -
22 mm
15/16" - 24 mm
= L
= L 1
Channel body with center outlet
8" - 20.3 cm
= L
= L 1
Channel body with off-set outlet