Shower Installation Guide

34 PRODUCT & ORDERING INFO
Inside Corner Outside Corner
Note: 1 mil = 1 one-thousandth of an inch
Schluter
®
-KERDI
Schluter
®
-KERDI is a pliable sheet-applied polyethylene waterproofing membrane and vapor retarder that guarantees uniform thickness.
It is covered on both sides with a fleece webbing to anchor the membrane in thin-set mortar. Schluter
®
-KERDI is ideal for waterproofing
floors and walls, including steam showers.
Unique Features and Benefits: - Hangs as effortlessly as wallpaper - Sheet application guarantees uniform thickness
- Pliable membrane makes corners easy - Zero VOCs
Schluter
®
-KERDI-BAND and Schluter
®
-KERDI-KERECK-F
Schluter
®
-KERDI-BAND is a waterproofing strip used to seal butt joints and floor/wall connections with the KERDI, DITRA, and DITRA-XL
mattings.
Schluter
®
-KERDI-KERECK-F are pre-formed, seamless, inside and outside corners.
Unique Features and Benefits: - Half the thickness of KERDI (4 mil), to limit buildup at seamed connections
Note: 1 mil = 1 one-thousandth of an inch
Schluter
®
-KERDI is listed by cUPC® and evaluated by ICC-ES (Report No. ESR-2467).
3
4
5
Schluter
®
-KERDI-SEAL-PS and -MV prefabricated seals are sections of the Schluter
®
-KERDI waterproofing membrane with overmolded
rubber gaskets that are used to seal pipe protrusions through the KERDI waterproofing membrane and protect moisture-sensitive solid backing
panels at the mixing valve.
Unique Features and Benefits: - Eliminate use of sealant at the specified protrusions
- Half the thickness of KERDI (4 mil), to limit buildup
Schluter
®
-KERDI-SEAL-PS/-MV
6
KERDI-SEAL-PS KERDI-SEAL-MV
Schluter
®
-KERDI
Waterproofing membrane
Item No. Dimensions Thickness
KERDI 200/5M
3' 3" x 16' 5" = 54 ft
2
(1 m x 5 m = 5 m
2
)
KERDI 200/10M
3' 3" x 33' = 108 ft
2
(1 m x 10 m = 10 m
2
)
KERDI 200
3' 3" x 98' 5" = 323 ft
2
(1 m x 30 m = 30 m
2
)
Schluter
®
-KERDI-BAND
Waterproofing strip
Item No. Width Length Thickness
KEBA 100/125/5M 5" - 125 mm 16 ' 5" - 5 m 4 mil
KEBA 100/125/10M 5" - 125 mm 33
' - 10 m 4 mil
KEBA 100/185/5M 7-1/4" - 185 mm 16 ' 5" - 5 m 4 mil
KEBA 100/250/5M
10" - 250 mm
16
' 5" - 5 m 4 mil
KEBA 100/125
5" - 125 mm
98
' 5" - 30 m 4 mil
KEBA 100/185 7-1/4" - 185 mm 98
' 5" - 30 m 4 mil
KEBA 100/250 10" - 250 mm 98
' 5" - 30 m 4 mil
Schluter
®
-KERDI-KERECK-F
Pre-formed waterproofing for inside and outside corners
Item No. Thickness Packaging
KERECK/FI 2 4 mil 2 Inside corners
KERECK/FI 10 4 mil
10 Inside corners
KERECK/FA 2 4 mil
2 Outside corners
KERECK/FA 10 4 mil 10 Outside corners
Schluter
®
-KERDI-SEAL-PS
Pipe seal with over-molded rubber gasket
Item No. Pipe nipple opening diameter Thickness Packaging
KMS185/12 1/2" - 12.5 mm 4 mil 1 unit
KMS185/20
3/4" - 20 mm
4 mil 1 unit
KMS10185/12
1/2" - 12.5 mm
4 mil 10 units
KMS10185/20 3/4" - 20 mm 4 mil 10 units
Schluter
®
-KERDI-SEAL-MV
Mixing valve seal with over-molded rubber gasket
Item No. Mixing valve opening diameter Thickness Packaging
KMSMV235/114
4-1/2" - 114 mm
4 mil 1 unit
KMSMV10235/114
4-1/2" - 114 mm
4 mil 10 units