Replacement Part List

5
SHOWER SYSTEM
KERDI-DRAIN and KERDI-LINE are designed
specifically to ensure a simple and secure
connection to bonded waterproof membranes,
such as KERDI, at the top of the assembly
rather than below it, thereby reducing the risk
of leakage, efflorescence, and mold growth.
Application and Function
8.2 Schluter
®
-KERDI-DRAIN is a floor
drain specifically designed to allow connections
to KERDI or other load-bearing, bonded
waterproof membranes. The membrane is
adhered to the large integrated bonding flange
to form a waterproof connection at the top of
the drain assembly. KERDI-DRAIN consists
of a drain casing and fully adjustable grate
assembly or covering support to which tile is
applied. The grate assembly accommodates
a wide range of tile thicknesses and allows
lateral and tilt adjustment as well. The
covering support is placed flush with the
top of the bonding flange and can therefore
accommodate any thickness tile covering.
The standard KERDI-DRAIN is attached
directly to the waste line. The drain casing
is available in ABS, PVC, or stainless
steel. The plastic drain casings feature a
fleece-covered bonding flange. They are
available with standard 2" (50 mm) and 3"
(75 mm) outlets and attached to the pipe
using an appropriate solvent cement. The
stainless steel drain casings are available with
standard 2" (50 mm) or 3" (75 mm) no-hub
outlets or 2" (50 mm) threaded outlet. The
no-hub outlets are attached to the pipe using
an appropriate mechanical (e.g., flexible or
no-hub) coupling. The threaded outlets are
attached to the pipe using thread sealing
compound or tape. The simple connection to
standard drain outlets makes KERDI-DRAIN
suitable for new construction and renovation.
The KERDI-DRAIN adaptor kit is designed
to convert clamping ring drains by equipping
them with an integrated bonding flange. The
adaptor kit includes a stainless steel adaptor
ring with an over-molded rubber gasket and
a variety of perforated hole patterns that align
with most common clamping ring shower
drains. The adaptor ring replaces the clamping
ring and is attached to the drain body using
the clamping ring bolts. This connection is
made watertight via the rubber gasket and
KERDI-FIX adhesive/sealant. The integrated
bonding flange slides into the adaptor ring,
with the over-molded rubber gasket ensuring
a watertight seal. KERDI-DRAIN ADAPTOR
KITS, available in 5-1/4" (133 mm) and 7-1/2"
(191 mm) diameter sizes, are used to convert
traditional clamping ring drains to integrated
bonding flange drains when removal of the
clamping ring drain is not practical (e.g., when
they are set in concrete slabs). Adaptor kits
are suitable for both mortar beds and KERDI-
SHOWER-T/-TS/-TT shower tray applications.
The KERDI-DRAIN grate assembly consists
of a frame, which can be seamlessly adjusted
to the thickness and layout of the ceramic tile
or stone covering via the height adjustment
collar and lateral adjustment ring, and grates
or cleanout covers that are placed within
the frame. The 4" (100 mm) standard grate
assembly frame features an approximately
1/8" (3 mm) wide reveal after installation
and grate/frame combinations are available
in stainless steel with plain, chrome, or oil-
rubbed bronze finish or anodized aluminum
with brushed nickel, brushed copper, or
brushed brass finish. The 4" (100 mm) style
grate assembly frame features a minimal
reveal after installation and can be combined
with one of three brushed stainless steel grate
options: Floral (E), Curve (F), or Pure (G). The
4" (100 mm) covering support is a square
stainless steel plate with KERDI laminated on
the surface to allow for bonding of ceramic
or stone tile, which creates a virtually invisible
drainage line. The 6" (150 mm) square and
round stainless steel grate assembly frames
feature an approximately 3/16" (5 mm) wide
reveal after installation and can be combined
with stainless steel grates or cleanout covers.
Please note that grate assemblies included
with the plastic KERDI-DRAIN featuring 3"
(75 mm) outlets and the residential adaptor
kits only allow vertical and tilt adjustment (no
lateral adjustment).
Schluter
®
-KERDI-DRAIN-H is a floor
drain with an integrated bonding flange that
provides as large contact area for a secure
connection to Schluter
®
-KERDI waterproof
membrane at the top of the assembly. KERDI-
DRAIN-H is appropriate for both mortar bed
and Schluter
®
-KERDI-SHOWER-T/-TS/-TT
shower tray applications. The bonding flange
is sloped to simplify installation of the mortar
bed.
The KERDI-DRAIN-H flange provides a
horizontal connection to the drain pipe and
is available in ABS or PVC with a 2" (50 mm)
outlet. It is ideal for applications where the use
of a vertical connection to the drain pipe is not
possible or practical (e.g., suspended or post-
tension concrete floors, basement slabs, or
wood floor installations where relocating the
hole in the floor is not practical). The horizontal
outlet allows the positioning of the drain in the
desired area regardless of drain pipe location.
A compensation board is available for use with
KERDI-DRAIN-H in conjunction the KERDI-
SHOWER-T/-TS/-TT shower trays.
KERDI-DRAIN-H corresponds with various
KERDI-DRAIN grate options, (available
separately). The KERDI-DRAIN grates are
fully adjustable (available in stainless steel
and anodized aluminum in various finishes)
that accommodates a wide range of tile
thicknesses: 1/4" (6 mm) to 1-1/4" (32
mm); or a tileable covering support that
accommodates any tile thickness and creates
a virtually invisible drainage line. The grate
assembly allows lateral and tilt adjustment
as well. Please note that grate assemblies
used with the plastic KERDI-DRAIN featuring
3" (75 mm) outlets only allow vertical and tilt
adjustment (no lateral adjustment). 6" -square
stainless steel covers are also available for
installations where KERDI-DRAIN or KERDI-
DRAIN-H are to be used in a cleanout
application.
8.7 Schluter
®
-KERDI-LINE is a low profile
linear floor drain specifically designed for
bonded waterproofing assemblies. KERDI-
LINE can be installed adjacent to walls or
at intermediate locations. The floor can be
sloped on a single plane to KERDI-LINE,
which enables the use of large-format tiles
and creates interesting design opportunities.
KERDI-LINE consists of a formed stainless
steel channel body and grate assembly or
covering support to which tile is applied.
The channel body features a standard 2"
(50 mm) no-hub outlet and is attached to
the pipe using an appropriate mechanical
(e.g., flexible or no-hub) coupling. The simple
connection to standard drain outlets makes
KERDI-LINE suitable for new construction
and renovation. KERDI-LINE is available with
both center and off-set outlets. The off-
set outlet is located 8" (20.3 cm) from the
edge of the channel body and provides
flexibility when obstacles (e.g., floor joists) are
encountered during installation. KERDI-LINE
includes a corresponding polystyrene foam
channel support to set the drain elevation to
the corresponding KERDI-SHOWER-LT/-LTS
shower trays. The perimeter of the channel
body consists of a bonding flange laminated
with a collar made of KERDI. It ensures a
simple and secure connection to the bonded
waterproofing assembly, both in the floor
area and on adjacent walls. KERDI-LINE is
available in channel lengths from 20" to 72"
(50 cm to 180 cm) in 4" (10 cm) increments.
The bonding flange extends approximately 1"
(2.5 cm) beyond the channel on all sides.
The KERDI-LINE grate assembly consists