Product Specifications Guide

Project 09 30 00 - 11 Tiling
I. Schluter
®
-ECK-KHK
1. Description: Stainless steel inside wall corner profile with 9/16 inch (15
mm) wide exposed surfaces joined by a symmetrically rounded inside
corner with 5/16 inch (8 mm) radius.
2. Material and Finish:
[E - Stainless Steel Type 304 = V2A]
[EV4A - Stainless Steel Type 316 L = V4A]
[EB - Brushed Stainless Steel Type 304 = V2A]
---------------------------------------------------------------------------------------------------------------------------------
Notes:
1. Select finish based on anticipated chemical stresses.
2. Select profile width according to aesthetics.
---------------------------------------------------------------------------------------------------------------------------------
J. Schluter
®
-RONDEC-DB
1. Description: profile with symmetrically rounded 3/8 inch (10 mm) wide,
17/32 inch (14 mm) tall exposed surface, integrated trapezoid-perforated
anchoring leg, and integrated grout joint spacer.
2. Material and Finish:
[AE - Satin Anodized Aluminum]
[AK - Satin Copper/Bronze Anodized Aluminum]
[AM - Satin Brass Anodized Aluminum]
---------------------------------------------------------------------------------------------------------------------------------
Notes:
1. RONDEC-DB can be used with tiles measuring 1/4 inch - 1/2 inch (6 mm - 12.5 mm) thick.
2. Matching outside corners available for Schluter
®
-RONDEC-DB.
---------------------------------------------------------------------------------------------------------------------------------
K. Schluter
®
-DESIGNLINE
1. Description: U-shaped profile with 1 inch (25 mm) wide exposed surface
and 1/4 inch (6 mm) tall integrated vertical anchoring legs on each side.
2. Material and Finish:
[E - Stainless Steel Type 304 = V2A]
[EB - Brushed Stainless Steel Type 304 = V2A]
[MC - Chrome-plated Solid Brass]
[AE - Satin Anodized Aluminum]
[ACG - Polished Chrome Anodized Aluminum]
[ACGB - Brushed Chrome Anodized Aluminum]
[AT - Satin Nickel Anodized Aluminum]
[ATG - Polished Nickel Anodized Aluminum]
[ATGB - Brushed Nickel Anodized Aluminum]
[AK - Satin Copper/Bronze Anodized Aluminum]
[AKG - Polished Copper/Bronze Anodized Aluminum]
[AKGB - Brushed Copper/Bronze Anodized Aluminum]
[AM - Satin Brass Anodized Aluminum]
[AMG - Bright Brass Anodized Aluminum]
[AMGB - Brushed Brass Anodized Aluminum]
---------------------------------------------------------------------------------------------------------------------------------
Notes:
1. Select material and finish based on anticipated mechanical and/or chemical stresses.
---------------------------------------------------------------------------------------------------------------------------------
L. Schluter
®
-RONDEC-CT