Product Specifications Guide

Project 09 30 00 - 28 Tiling
requirements of the “American national standard specifications for load
bearing, bonded, waterproof membranes for thin-set ceramic tile and
dimension stone installation A118.10,” and is listed by cUPC®, and is
evaluated by ICC-ES (see Report No. ESR-2467).
B. Schluter
®
-DITRA-XL
1. Description: 9/32 inch (7 mm) thick, orange, high-density polyethylene
membrane with a grid structure of 1/2 inch x 1/2 inch (12 mm x 12 mm)
square cavities, each cut back in a dovetail configuration, and a
polypropylene anchoring fleece laminated to its underside. Conforms to
definition for uncoupling membranes in the Tile Council of North America
Handbook for Ceramic Tile Installation; and meets or exceeds the
requirements of the “American national standard specifications for load
bearing, bonded, waterproof membranes for thin-set ceramic tile and
dimension stone installation A118.10,” and is listed by cUPC®, and is
evaluated by ICC-ES (see Report No. ESR-2467).
2.09 WATERPROOFING MEMBRANE
---------------------------------------------------------------------------------------------------------------------------------
Ceramic and stone tiles are durable, easy to maintain, and hygienic, representing ideal surface
coverings in wet areas. However, since tiles and grout are not inherently waterproof, it is
essential to protect the substrate (commonly moisture-sensitive) from moisture and vapor
penetration. Schluter
®
-KERDI is a pliable, sheet-applied bonded waterproofing membrane that
also protects against vapor intrusion in showers, tub surrounds, backsplashes, and wainscotings.
---------------------------------------------------------------------------------------------------------------------------------
A. Schluter
®
-KERDI
1. Description: 0.008 inch (0.2 mm) thick, orange polyethylene membrane,
with polypropylene fleece laminated on both sides, which meets or
exceeds the requirements of the “American national standard
specifications for load bearing, bonded, waterproof membranes for thin-set
ceramic tile and dimension stone installation A118.10,” and is listed by
cUPC®, and is evaluated by ICC-ES (see Report No. ESR-2467).
---------------------------------------------------------------------------------------------------------------------------------
Notes:
1. KERDI is available in 0.004 inch (0.1 mm) thick, 5 inch (125 mm), 7-1/4 inch (185 mm), and
10 inch (250 mm) wide bands for seams, corners and pre-fabricated seals (Schluter
®
-
KERDI-BAND and Schluter
®
-KERDI-SEAL-PS/-MV).
---------------------------------------------------------------------------------------------------------------------------------
2.10 FLOOR DRAIN WITH INTEGRATED BONDING FLANGE
---------------------------------------------------------------------------------------------------------------------------------
The Schluter
®
-KERDI-DRAIN was designed specifically to ensure a simple and secure
connection to bonded waterproof membranes, such as Schluter
®
-KERDI, at the top of the
assembly rather than below it, thereby reducing the risk of leakage, efflorescence, and mold
growth.
---------------------------------------------------------------------------------------------------------------------------------
A. Schluter
®
-KERDI-DRAIN [Plastic]
1. Description: floor drain 11-13/16 inch (300 mm) diameter, trapezoid-
perforated, sloped integrated bonding flange with thermally laminated
polypropylene fleece and grate assembly. Grate assembly includes
grate, height adjustment collar, and lateral adjustment ring with trapezoid