Product Specifications Guide

Project 09 30 00 - 5 Tiling
C. Schluter
®
-RENO-T
1. Description: T-shaped profile with 1/16 inch (1 mm) thick beveled exposed
surface and 11/32 inch (9 mm) tall integrated vertical anchoring leg.
2. Material and Finish:
[E - Stainless Steel Type 304 = V2A]
[EB - Brushed Stainless Steel Type 304 = V2A]
[M - Solid Brass]
[AE - Satin Anodized Aluminum]
[AT - Satin Nickel Anodized Aluminum]
[AK - Satin Copper/Bronze Anodized Aluminum]
[AM - Satin Brass Anodized Aluminum]
3. Width:
[17/32 inch (14 mm)]
[1 inch (25 mm)]
---------------------------------------------------------------------------------------------------------------------------------
Notes:
1. Select material and finish based on anticipated mechanical and/or chemical stresses.
2. Select profile width according to joint width.
3. RENO-T is used as a transition between hard surfaces.
---------------------------------------------------------------------------------------------------------------------------------
D. Schluter
®
-RENO-TK
1. Description: profile with sloped exposed surface, 1/4 inch (6 mm) deep
channel below exposed surface, integrated trapezoid-perforated anchoring
leg, and integrated grout joint spacer.
2. Material and Finish:
[E - Stainless Steel Type 304 = V2A]
[EB - Brushed Stainless Steel Type 304 = V2A]
[M - Solid Brass]
[AE - Satin Anodized Aluminum]
[ACB - Bright Chrome Anodized Aluminum]
[AT - Satin Nickel Anodized Aluminum]
[AK - Satin Copper/Bronze Anodized Aluminum]
[ATGB - Brushed Nickel Anodized Aluminum]
[AKGB - Brushed Copper/Bronze Anodized Aluminum]
[ABGB - Brushed Antique Bronze Anodized Aluminum]
[AMB - Bright Brass Anodized Aluminum]
3. Height: [ ____ ] or [Height as required]
---------------------------------------------------------------------------------------------------------------------------------
Notes:
1. Select material and finish based on anticipated mechanical and/or chemical stresses.
2. Select profile height according to tile thickness. Consult Schluter
®
-Systems’ Illustrated
Price List for availability.
3. The anchoring leg of Schluter
®
-RENO-TK, in solid brass and anodized aluminum, sizes 60,
80, and 100, is also available with a special radius perforation so that the profile can
conform to curved applications.
---------------------------------------------------------------------------------------------------------------------------------
E. Schluter
®
-RENO-U
1. Description: profile with sloped exposed surface, 5/32 inch (4 mm) tall
leading edge, integrated trapezoid-perforated anchoring leg, and
integrated grout joint spacer.
2. Material and Finish:
[E - Stainless Steel Type 304 = V2A]