Project 09 30 00 - 1 Tiling
Project 09 30 00 - 2 Tiling
TABLE OF CONTENTS Part 1 GENERAL 1.01 Section Includes 2 1.02 Related Sections 2 1.03 References 3 Part 2 PRODUCTS 2.01 Manufacturers 3 2.02 Tile 3 2.03 Edge-protection and Transition Profiles for Floors 4-6 2.04 Finishing and Edge-protection Profiles for Walls and Countertops 7-13 2.05 Finishing and Edge-protection Profiles for Stair Nosings 13-17 2.06 Movement Joints and Cove-shaped Profiles 17-26 2.07 Modular Screed System 27 2.08 Uncoupling Membrane 27-28 2.
SECTION 09 30 00 TILING PART 1 GENERAL 1.01 SECTION INCLUDES A. Ceramic tile and dimension stone B. Edge-protection and transition profiles for floors C. Finishing and edge-protection profiles for walls and countertops D. Wall access panel system E. Finishing and edge-protection profiles for stair nosings F. Movement joint and cove-shaped profiles G. Modular screed system H. Uncoupling membrane I. Waterproofing membrane J. Floor drain, with integrated bonding flange K.
1.03 REFERENCES ------------------------------------------------------------------------------------------- -------------------------------------® The following references pertain to Schluter -Systems’ products.
2.03 EDGE-PROTECTION AND TRANSITION PROFILES FOR FLOORS ----------------------------------------------------------------------------------------------------------------------------- ---Ceramic and stone tile are brittle materials whose exposed edges are prone to cracking and chipping when left unprotected. Transitions between floor surfaces and at thresholds are ® particularly vulnerable to damage.
C. Schluter®-RENO-T 1. Description: T-shaped profile with 1/16 inch (1 mm) thick beveled exposed surface and 11/32 inch (9 mm) tall integrated vertical anchoring leg. 2. Material and Finish: [E - Stainless Steel Type 304 = V2A] [EB - Brushed Stainless Steel Type 304 = V2A] [M - Solid Brass] [AE - Satin Anodized Aluminum] [AT - Satin Nickel Anodized Aluminum] [AK - Satin Copper/Bronze Anodized Aluminum] [AM - Satin Brass Anodized Aluminum] 3.
3.
2.04 FINISHING AND EDGE-PROTECTION PROFILES FOR WALLS AND COUNTERTOPS ----------------------------------------------------------------------------------------------------------------------------- ---Ceramic and stone tiles are durable, hygienic, heat resistant, and easy to maintain, representing the ideal surface covering for walls and countertops. However, lack of trim pieces such as ® bullnose or quarter round in many tile lines can limit design options.
----------------------------------------------------------------------------------------------------------------------------- ---- B. Schluter®-SCHIENE 1. Description: L-shaped profile with 1/8 inch (3.2) wide top section and vertical wall section that together form the visible surface, integrated trapezoid-perforated anchoring leg, and integrated grout joint spacer. 2.
[AE - Satin Anodized Aluminum] [AT - Satin Nickel Anodized Aluminum] [ABGB - Brushed Antique Bronze Anodized Aluminum] ----------------------------------------------------------------------------------------------------------------------------- ---Notes: ® 1. Consult Schluter -Systems’ Illustrated Price List for availability. ® 2. Matching inside / outside corners / end caps are available for Schluter -QUADEC-FS.
1. 2. Select material and finish based on anticipated mechanical and/or chemical stresses. ® Select profile height according to tile thickness. Consult Schluter -Systems’ Illustrated Price List for availability. ® 3. Matching inside and outside corners and connectors are available for Schluter -RONDEC. 4. Color-coated aluminum RONDEC not available in GS - Black color. --------------------------------------------------------------------------------------------------------------------------------- F.
I. Schluter®-ECK-KHK 1. Description: Stainless steel inside wall corner profile with 9/16 inch (15 mm) wide exposed surfaces joined by a symmetrically rounded inside corner with 5/16 inch (8 mm) radius. 2. Material and Finish: [E - Stainless Steel Type 304 = V2A] [EV4A - Stainless Steel Type 316 L = V4A] [EB - Brushed Stainless Steel Type 304 = V2A] ---------------------------------------------------------------------------------------------------- ----------------------------Notes: 1.
1. 2. 3. Description: anodized aluminum, double-rail profile with symmetricallyrounded exposed surfaces with 1/4 inch (6 mm) radius separated by a 11/4 inch (31 mm) wide recessed section with dovetail channels, integrated trapezoid-perforated anchoring leg, and integrated grout joint spacer.
--------------------------------------------------------------------------------------------------------------------- ------------ N. Schluter®-REMA 1. Description: wall access panel system featuring aluminum brackets with molded casings containing magnets that are clamped to lateral, movable guide shoes, and ferromagnetic metal counterplates. 2.
Notes: ® 1. Select profile height according to tile thickness. Consult Schluter -Systems’ Illustrated Price List for availability. ® 2. Matching end caps are available for Schluter -TREP-G-S. ----------------------------------------------------------------------------------------------------------------------------- ---- D. Schluter®-TREP-G-B 1.
G. Schluter®-TREP-SE 1. Description: Profile with replaceable, ribbed, 1-1/32 inch (26 mm) wide, thermoplastic rubber exposed surface with rounded leading edge, and rollformed stainless steel type 304 = V2A support section with integrated trapezoid-perforated anchoring leg. 2. Tread Color: [HB - Light Beige] [NB - Nut Brown] [GS - Black] [G - Grey] [CG - Yellow] 3.
Notes: ® 1. Select profile height according to tile thickness. Consult Schluter -Systems’ Illustrated Price List for availability. 2. Matching end caps and replacement thermoplastic rubber inserts are available for ® Schluter -TREP-B. ------------------------------------------------------------------------------------------------------------------------- -------- J. Schluter®-TREP-FL 1.
® Select profile height according to tile thickness. Consult Schluter -Systems’ Illustrated Price List for availability. ® 2. Matching end caps are available for Schluter -TREP-MT. ----------------------------------------------------------------------------------------------------------------------------- ---1. M. Schluter®-TREP-TL 1.
loading. This differential expansion/contraction of components in a composite assembly results in internal stresses. Furthermore, structures that restrain overall expansion of the tile field (walls, columns, etc.) cause stress buildup within the system. If the aforementioned movements are not accommodated through the use of movement joints in the tile field and at restraining structures, the resulting stresses can cause cracking of the grout and tile and delamination of the tile from the substrate.
2. 3. Movement Zone Color: [SP - Sand Pebble] [HB - Light Beige] [GS - Black] [PG - Classic Grey] [G - Grey] Height: [ ____ ] or [Height as required] --------------------------------------------------------------------------------------------------------------------------------Notes: ® 1. Select profile height according to tile thickness. Consult Schluter -Systems’ Illustrated Price List for availability.
2. 3. 4. thermoplastic rubber movement zone, which together form the visible surface. Anchoring Legs Material: [E - Stainless Steel Type 304 = V2A] [EV4A - Stainless Steel Type 316 L = V4A] Movement Zone Color: [HB - Light Beige] [GS - Black] [PG - Classic Grey] [G - Grey] Height: [ ____ ] or [Height as required] --------------------------------------------------------------------------------------------------------------------------------Notes: ® 1. Select profile height according to tile thickness.
® Select profile height according to tile thickness. Consult Schluter -Systems’ Illustrated Price List for availability. ----------------------------------------------------------------------------------------------------------------------------- ---1. I. Schluter®-DILEX-BT 1.
Notes: 1. Select profile height according to mortar bed and tile thickness. --------------------------------------------------------------------------------------------------------------------------------- M. Schluter®-DILEX-MP 1. Description: profile with dovetailed, rigid, recycled PVC side sections overlapped and connected by a 5/16 inch (8 mm) wide soft CPE central movement zone that forms the visible surface. 2.
3. [PG - Classic Grey] [G - Grey] Height: [ ____ ] or [Height as required] ----------------------------------------------------------------------------------------------------------------------------- ---Notes: ® 1. Select profile height according to tile thickness. Consult Schluter -Systems’ Illustrated Price List for availability. ----------------------------------------------------------------------------------------------------------------------------- ---- Q. Schluter®-DILEX-KSA 1.
2. 3. Cove Section Color: [BW - Bright White] [HB - Light Beige] [PG - Classic Grey] [G - Grey] Height: [ ____ ] or [Height as required] ----------------------------------------------------------------------------------------------------------------------------- ---Notes: ® 1. Select profile height according to tile thickness. Consult Schluter -Systems’ Illustrated Price List for availability. 2.
3. [TSG - Tuscan Pewter Color-coated Aluminum] Height: [ ____ ] or [Height as required] ----------------------------------------------------------------------------------------------------------------------------- ---Notes: ® 1. Select profile height according to tile thickness. Consult Schluter -Systems’ Illustrated Price List for availability. 2. Matching inside and outside corners and end caps are available for DILEX-AHK.
3. [E - Stainless Steel Type 304 = V2A] [EV4A - Stainless Steel Type 316 L = V4A] [EB - Brushed Stainless Steel Type 304 = V2A] Height: [ ____ ] or [Height as required] --------------------------------------------------------------------------------------------------------------------------------Notes: 1. Select material and finish based on anticipated mechanical and/or chemical stresses. ® 2. Select profile height according to tile thickness.
2.07 MODULAR SCREED SYSTEM --------------------------------------------------------------------------------------------------------------------------------® Schluter -BEKOTEC is a modular screed system that produces permanent flooring assemblies that are free from internal stresses. This allows for the installation of continuous screed surfaces without any saw cuts or control joints.
requirements of the “American national standard specifications for load bearing, bonded, waterproof membranes for thin-set ceramic tile and dimension stone installation A118.10,” and is listed by cUPC®, and is evaluated by ICC-ES (see Report No. ESR-2467). B. Schluter®-DITRA-XL 1.
2. 3. 4. 5. perforations. Drain listed by UPC® to meet requirements of “International Association of Plumbing and Mechanical Officials Interim Guide Criteria for Floor Drain with Integrated Bonding Flange” (IGC 195), listed by CSA to meet requirements of the Canadian Standards Association standard, “Floor, Area, and Shower Drains, and Cleanouts for Residential Construction” (CSA B79), and referenced in method B422 of the Tile Council of North America Handbook for Ceramic Tile Installation.
1. Description: Low profile linear rectangle floor drain consisting of a formed stainless steel channel body with a 2 inch no-hub outlet, and grate assembly that can be seamlessly adjusted to tile or stone covering thickness from 1/8 inch (3 mm) to 1 inch (25 mm). Grate assembly includes a brushed stainless steel grate, height adjustment system and bonded Schluter-KERDI Membrane 0.008 inch (0.
[4 inch (100 mm) x 4 inch (100 mm) square] [6 inch (150 mm) x 6 inch (150 mm) square] [6 inch (150 mm) round] 3. Bonding Flange Length: [1-9/16 inch (39.7 mm)] [3-41/64 inch (92.4 mm)] D. Schluter®-KERDI-DRAIN ADAPTOR KIT [Stainless Steel] 1. Description: floor drain adaptor kit consisting of stainless steel adaptor ring with over-molded santoprene gasket, 9-27/32 inch (250 mm) diameter sloped integrated bonding flange, and grate assembly.
[ST-183 - 72 inch x 72 inch x 1-1/2 inch (1830 mm x 1830 mm x 38 mm)] --------------------------------------------------------------------------------------------------------------------------------Notes: 1. The ST-81/152 BR features an off-set drain placement 10 inches from the outer edge. All other KERDI shower trays feature a center drain placement. --------------------------------------------------------------------------------------------------------------------------------- B.
2. expanded polystyrene, with 1/8 inch (3 mm) wide ribs on top and channels on the underside. Size: [SB41 - 16 inch x 16 inch x 20 inch (41 cm x 41 cm x 51 cm)] [SB2981 - 32 inch x 11-1/2 inch x 20 inch (81 cm x 29 cm x 51 cm)] [SB29107 - 42 inch x 11-1/2 inch x 20 inch (107 cm x 29 cm x 51 cm)] [SB29122 - 48 inch x 11-1/2 inch x 20 inch (122 cm x 29 cm x 51 cm)] [SB4181 - 32 inch x 16 inch x 20 inch (81 cm x 41 cm x 51 cm)] [SB41122 - 48 inch x 16 inch x 20 inch (122 cm x 41 cm x 51 cm)] F.
2.13 DRAINAGE MEMBRANES ----------------------------------------------------------------------------------------------------------------------------- ---Proper drainage is an essential feature of exterior tile assemblies where water is allowed to infiltrate a mortar setting bed. Water expands when it freezes and can exert great pressure and cause damage to its surroundings. Thus, any moisture that enters a setting bed must be allowed to leave the system quickly.
3. [AC - Color-coated Aluminum] Color (if AC chosen as material and finish): [BW - Bright White] [HB - Light Beige] [RB - Red Brown] [SB - Black Brown] [PG - Classic Grey] [GM - Metallic Grey] Height: [ ____ ] or [Height as required] ------------------------------------------------------------------------------------------------ --------------------------------Notes: 1. Select material and finish based on anticipated mechanical and/or chemical stresses. ® 2.
E. Schluter®-BARA-RAK 1. Description: color-coated aluminum profile with a 3-1/8 inch (80 mm) wide integrated trapezoid-perforated anchoring leg, 2 inch (50 mm) tall vertical section, and 1-3/32 inch (28 mm) tall drip lip with 1-1/16 inch (27 mm) offset from the vertical section. 2.
2. Color: [BW - Bright White] [HB - Light Beige] [RB - Red Brown] [SB - Black Brown] [PG - Classic Grey] [GM - Metallic Grey] ----------------------------------------------------------------------------------------------------------------------------- ---Notes: 1. BARIN is designed to integrate with BARA-RTK and BARA-RTP profiles. 2. Matching inside and outside corners, end caps, down couplings, elbow and tee pipes, and spouts are available for BARIN.
SECTION 09 30 00 TILING PART 1 GENERAL 1.01 SECTION INCLUDES A. Shower waterproofing: prefabricated substrates, waterproofing membrane, floor drain with integrated bonding flange, and sealant 1.02 RELATED SECTIONS A. Section 06 10 00 - Rough Carpentry: plywood subfloor and underlayment B. Section 09 28 13 - Gypsum Board: gypsum board and tile backer boards C. Section 22 40 00 - Plumbing Fixtures: floor drains 1.03 REFERENCES A.
specifications for load bearing, bonded, waterproof membranes for thin-set ceramic tile and dimension stone installation A118.10,” and is listed by cUPC®, and is evaluated by ICC-ES (see Report No. ESR-2467). B. Schluter®-KERDI-DRAIN [Plastic] 1. Description: floor drain 11-25/32 inch (300 mm) diameter, trapezoidperforated, sloped integrated bonding flange with thermally laminated polypropylene fleece and grate assembly.
A. Consult Schluter®-Systems’ current technical literature for proper design and installation instructions.
SECTION 09 30 00 TILING PART 1 GENERAL 1.01 SECTION INCLUDES A. Ceramic tile and dimension stone B. Edge-protection and transition profiles for floors 1.02 RELATED SECTIONS A. Section 03 00 00 - Concrete 1.03 REFERENCES A. Tile Council of North America (TCNA) Handbook for Ceramic Tile Installation B. American National Standard Specifications for the installation of ceramic tile A108 / A118 / A136.1 PART 2 PRODUCTS 2.01 MANUFACTURERS A. Schluter Systems, L.P.
----------------------------------------------------------------------------------------------------------------------------- ---To be determined by installation method(s), environment(s), and associated materials (e.g., tile type, underlayments, etc.) ----------------------------------------------------------------------------------------------------------------------------- ---- PART 3 EXECUTION 3.01 APPLICATION A.
NOTES Project 09 30 00 - 43 Tiling
NOTES Project 09 30 00 - 44 Tiling
