Product Specifications Guide

Project 09 30 00 - 30 Tiling
1. Description: Low profile linear rectangle floor drain consisting of a formed
stainless steel channel body with a 2 inch no-hub outlet, and grate
assembly that can be seamlessly adjusted to tile or stone covering
thickness from 1/8 inch (3 mm) to 1 inch (25 mm). Grate assembly
includes a brushed stainless steel grate, height adjustment system and
bonded Schluter-KERDI Membrane 0.008 inch (0.2 mm) thick, which
meets or exceeds the requirements of the American national standard
specifications for load bearing, bonded, waterproof membranes for thin-
set ceramic tile and dimension stone installation A118.10, and is listed by
cUPC, and is evaluated by ICC-ES (see Report No. ESR-2467). Meeting
ANSI A118.10 as detail as referenced in method B422 of the Tile Council
of North America Handbook for Ceramic Tile Installation.
2. Channel Body and Grate Nominal Length:
[2-1/8 inch (54 mm) by 20 inch (50 cm) rectangle]
[2-1/8 inch (54 mm) by 24 inch (60 cm) rectangle]
[2-1/8 inch (54 mm) by 28 inch (70 cm) rectangle]
[2-1/8 inch (54 mm) by 32 inch (80 cm) rectangle]
[2-1/8 inch (54 mm) by 36 inch (90 cm) rectangle]
[2-1/8 inch (54 mm) by 40 inch (100 cm) rectangle]
[2-1/8 inch (54 mm) by 44 inch (110 cm) rectangle]
[2-1/8 inch (54 mm) by 48 inch (120 cm) rectangle]
3. Grate Frame Height:
[3/4 inch (19 mm)]
[1-1/8 inch (30 mm)]
[Not required for Frameless Tileable Grate]
[Height as required Brushed Stainless Steel]
4. Grate Material and Finish:
[EB –Square Perforated Brushed Stainless Steel Type 304 = V2A]
[EB –Closed Solid Brushed Stainless Steel Type 304 = V2A]
[EB –2 inch (50 mm) wide Frameless Tileable Plate Stainless Steel Type
304 = V2A]
---------------------------------------------------------------------------------------------------------------------------------
Notes:
1. Select grate material and finish based on anticipated mechanical and/or chemical stresses.
2. Please Consult Schluter
®
-Systems’ Illustrated Price List for product selection and
availability.
3. Consult Schluter
®
-Systems to confirm that your selected drain configuration meets the
appropriate listing.
---------------------------------------------------------------------------------------------------------------------------------
C. Schluter
®
-KERDI-DRAIN ADAPTOR KIT [Plastic]
1. Description: floor drain adaptor kit consisting of stainless steel adaptor
ring with over-molded santoprene gasket, 11-13/16 inch (300 mm)
diameter sloped integrated bonding flange with thermally laminated
polypropylene fleece, and grate assembly. Grate assembly includes
grate, height adjustment collar, and lateral adjustment ring with trapezoid
perforations. Drain detail as referenced in method B422 of the Tile
Council of North America Handbook for Ceramic Tile Installation.
2. Grate Material and Finish:
[E - Stainless Steel Type 304 = V2A]
[EOB - Oil-rubbed Bronze Stainless Steel Type 304 = V2A]
[ATGB - Brushed Nickel Anodized Aluminum]
[AKGB - Brushed Copper/Bronze Anodized Aluminum]
[AMGB - Brushed Brass Anodized Aluminum]
Nominal Grate Size: