Installation Guide

46 PRODUCT & ORDERING INFO
Schluter
®
-KERDI-BOARD
Substrate and building panel
H = Item No.
Panel dimension: 32" x 48" (81 cm x 122 cm)
1/2" (12.5 mm) KB 12 1220 812
Panel dimension: 48" x 64" (122 cm x 162.5 cm)
3/16" (5 mm) KB 5 1220 1625
3/8" (9 mm) KB 9 1220 1625
1/2" (12.5 mm) KB 12 1220 1625
Panel dimension: 48" x 96" (122 cm x 244 cm)
3/16" (5 mm) KB 5 1220 2440
3/8" (9 mm) KB 9 1220 2440
1/2" (12.5 mm) KB 12 1220 2440
5/8" (15 mm) KB 15 1220 2440
Panel dimension: 24-1/2" x 96" (62.5 cm x 244 cm)
3/4" (19 mm) KB 19 625 2440
1" (25 mm) KB 25 625 2440
1-1/2" (38 mm) KB 38 625 2440
2" (50 mm) KB 50 625 2440
Panel dimension: 48" x 120" (122 cm x 305 cm)
5/8" (15 mm) KB 15 1220 3050
Schluter
®
-KERDI-BOARD
KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be
used for creating bonded waterproofing assemblies with tile coverings. It consists of an
extruded polystyrene foam panel, with a special reinforcement material on both sides
and fleece webbing for effective anchoring in thin-set mortar.
The boards are simply cut to size with a utility knife. The gridlines, which are printed on
the surface, are helpful for neat and quick cuts and installation. Tiles can be installed
directly over KERDI-BOARD using the thin-set method.
Additional panels and accessories
Please refer to our Illustrated Price List for details.
Grooved panels
L-shaped panels U-shaped panels
Anchors
Profiles
Washers, screws
and adhesive tape
Schluter
®
-DITRA
Item No. Packaging
DITRA uncoupling and waterproofing membrane (1/8" - 3 mm thick)
DITRA 5M 3' 3" x 16' 5" = 54 ft
2
(1 m x 5 m = 5 m
2
)
DITRA 150 3' 3" x 45' 9" = 150 ft
2
(1 m x 14 m = 14 m
2
)
DITRA 30 3' 3" x 98' 5" = 323 ft
2
(1 m x 30 m = 30 m
2
)
DITRA-XL uncoupling and waterproofing membrane (5/16" - 7 mm thick)
DITRA-XL/175 3' 3" x 53' 3" = 175 ft
2
(1 m x 16.25 m = 16.25 m
2
)
Schluter
®
-DITRA
DITRA is a pressure-stable polyethylene uncoupling membrane, vacuum-formed
in a cutback grid design, with an anchoring fleece laminated to its underside.
DITRA is 1/8" (3 mm) in height. DITRA-XL is 5/16" (7 mm) in height.
Schluter
®
-DITRA-TROWEL and Schluter
®
-KERDI-TROWEL
Used to install DITRA and KERDI membranes. The DITRA-TROWEL features an
11/64" x 11/64" (4.5 mm x 4.5 mm) square-notched design while the KERDI-TROWEL
features a 1/8" x 1/8" (3 mm x 3 mm) square-notched design.
Schluter
®
-DITRA-TROWEL and Schluter
®
-KERDI-TROWEL
Trowels used to install Schluter
®
-DITRA and Schluter
®
-KERDI membranes
Item No. Notch Size Packaging
TRL-DIT6 11/64" x 11/64" (4.5 mm x 4.5 mm) 6 units
TRL-KER6 1/8" x 1/8" (3 mm x 3 mm) 6 units
DITRA and DITRA-XL are listed by cUPC® and
evaluated by ICC-ES (Report Nos. ESR-2467 and
PMG-1204).