Installation Guide

Intermediate placement
5-15/32" - 137 mm
2-1/4" -
57 mm
7/8" -
22 mm
7/8" -
22 mm
15/16" - 24 mm
Schluter
®
-KERDI-LINE
KERDI-LINE is a low profile linear floor drain specifically designed for bonded
waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at
intermediate locations in showers, wet rooms, and other applications that require
waterproofing and drainage. The floor can be sloped on a single plane to KERDI-LINE,
which enables the use of large-format tiles and creates interesting design opportunities.
The KERDI-LINE channel body is made of formed stainless steel and features a collar
made of Schluter
®
-KERDI for a secure waterproof connection. The grate assembly is
available in three design options. Grate and frame assemblies (A and B) are available
in brushed stainless steel, or stainless steel with chrome finish, and can be adjusted
for use with tile coverings from 1/8" to 1" (3 mm to 25 mm)-thick. The tileable covering
support can accommodate any thickness of tile covering.
Note: There are multiple selections to be made for this product. Start by selecting the
appropriate flange length then proceed to grate selection accordingly, keeping in mind
there are two frame height options and three grate options.
KERDI-LINE linear floor drain
L =
in. - cm
Grate A - Brushed stainless steel Grate A - Chrome Grate B - Brushed stainless steel Grate B - Chrome Grate D
Frame =
3/4" - 19 mm
Frame =
1-1/8" - 30 mm
Frame =
3/4" - 19 mm
Frame =
3/4" - 19 mm
Frame =
1-1/8" - 30 mm
Frame =
3/4" - 19 mm
For use
with channel body
with center outlet
For use
with channel body
with off-set outlet
19-11/16 - 50 KLAR 19 EB 50 KLAR 30 EB 50 KLAR 19 EP 50 KLB 19 EB 50 KLB 30 EB 50 KLB 19 EP 50 KLDRE 50 -
23-5/8 - 60 KLAR 19 EB 60 KLAR 30 EB 60 KLAR 19 EP 60 KLB 19 EB 60 KLB 30 EB 60 KLB 19 EP 60 KLDRE 60 -
27-9/16 - 70 KLAR 19 EB 70 KLAR 30 EB 70 KLAR 19 EP 70 KLB 19 EB 70 KLB 30 EB 70 KLB 19 EP 70 KLDRE 70 KLDRO E 70
31-1/2 - 80 KLAR 19 EB 80 KLAR 30 EB 80 KLAR 19 EP 80 KLB 19 EB 80 KLB 30 EB 80 KLB 19 EP 80 KLDRE 80 KLDRO E 80
35-7/16 - 90 KLAR 19 EB 90 KLAR 30 EB 90 KLAR 19 EP 90 KLB 19 EB 90 KLB 30 EB 90 KLB 19 EP 90 KLDRE 90 KLDRO E 90
39-3/8 - 100 KLAR 19 EB 100 KLAR 30 EB 100 KLAR 19 EP 100 KLB 19 EB 100 KLB 30 EB 100 KLB 19 EP 100 KLDRE 100 KLDRO E 100
43-5/16 - 110 KLAR 19 EB 110 KLAR 30 EB 110 KLAR 19 EP 110 KLB 19 EB 110 KLB 30 EB 110 KLB 19 EP 110 KLDRE 110 KLDRO E 110
47-1/4 - 120 KLAR 19 EB 120 KLAR 30 EB 120 KLAR 19 EP 120 KLB 19 EB 120 KLB 30 EB 120 KLB 19 EP 120 KLDRE 120 KLDRO E 120
51-3/16 - 130 KLAR 19 EB 130 - - KLB 19 EB 130 - - KLDRE 130 -
55-1/8 - 140 KLAR 19 EB 140 - - KLB 19 EB 140 - - KLDRE 140 -
59-1/16 - 150 KLAR 19 EB 150 - - KLB 19 EB 150 - - KLDRE 150 -
62-15/16 - 160 KLAR 19 EB 160 - - KLB 19 EB 160 - - KLDRE 160 -
66-7/8 - 170 KLAR 19 EB 170 - - KLB 19 EB 170 - - KLDRE 170 -
70-13/16 - 180 KLAR 19 EB 180 - - KLB 19 EB 180 - - KLDRE 180 -
KERDI-LINE is listed by ICC-ES (Report No. PMG-1204), UPC®, CSA, and NSF. Note: Purchase bonding flange and grate assembly separately.
= H
3/8" -
10 mm
1-27/32" -
47 mm
2-29/32" - 74 mm
Wall placement
4-23/32" - 120 mm
2-1/4" -
57 mm
7/8" -
22 mm
7/8" -
22 mm
15/16" - 24 mm
= L
= L 1
Channel body with center outlet
8" - 20.3 cm
= L
= L 1
Channel body with off-set outlet
PRODUCT & ORDERING INFO 49
KERDI-LINE linear floor drain
Channel body - stainless steel
L =
in. - cm
L
1
=
in. - cm
Center outlet Off-set outlet
19-11/16 - 50 21-11/16 - 55 KLV 60 E 50 -
23-5/8 - 60 25-5/8 - 65 KLV 60 E 60 -
27-9/16 - 70 29-9/16 - 75 KLV 60 E 70 KLVO 60 E 70
31-1/2 - 80 33-1/2 - 85 KLV 60 E 80 KLVO 60 E 80
35-7/16 - 90 37-7/16 - 95 KLV 60 E 90 KLVO 60 E 90
39-3/8 - 100 41-3/8 - 105 KLV 60 E 100 KLVO 60 E 100
43-5/16 - 110 45-5/16 - 115 KLV 60 E 110 KLVO 60 E 110
47-1/4 - 120 49-1/4 - 125 KLV 60 E 120 KLVO 60 E 120
51-3/16 - 130 53-3/16 - 135 KLV 60 E 130 -
55-1/8 - 140 57-1/8 - 145 KLV 60 E 140 -
59-1/16 - 150 61-1/16 - 155 KLV 60 E 150 -
62-15/16 - 160 64-15/16 - 165 KLV 60 E 160 -
66-7/8 - 170 68-7/8 - 175 KLV 60 E 170 -
70-13/16 - 180 72-13/16 - 185 KLV 60 E 180 -
Closed (A) – Brushed stainless steel
Closed (A) – Chrome
= H
3/8" -
10 mm
2-1/8" - 54 mm
2-29/32" - 74 mm
Perforated (B) – Brushed stainless steel
Perforated (B) – Chrome
2" - 50 mm
Frameless Tileable (D) Patent pending