Replacement Part List

ManualsBrandsSchluter ManualsFloor Installation KitsKerdi-Line Brushed Stainless Steel 47-1/4 in. Closed Grate Assembly with 3/4 in. Frame

FLOOR DRAINS

Schluter

-KERDI-DRAIN - Suitable Flange and Grate Combinations

Grate - 4" (100 mm) Grate - 6" (150 mm)

Stainless steel Anodized aluminum

STYLE -

Brushed stainless steel

Stainless steel

Stainless

steel

Chrome

Bronze

EOB

Tileable

ECS

Copper

AKGB

Brass

AMGB

Nickel

ATGB

Pure Curve Floral

Square

Round

6RE

Cover

6CE

2" PVC √ √ √ √ √ √ √ √ √ √ √ √ √

2" ABS √ √ √ √ √ √ √ √ √ √ √ √ √

2" PVC Horizontal √ √ √ √ √ √ √ √ √ √ √ √ √

2" ABS Horizontal √ √ √ √ √ √ √ √ √ √ √ √ √

2" Stainless steel √ √ √ √ √ √ √ √ √ √ √ √ √

2" Stainless steel

Threaded

√ √ √ √ √ √ √ √ √ √ √ √ √

3" PVC √ √ √

3" ABS √ √ √

3" Stainless steel √ √ √

5-1/4" Adaptor √ √ √ √ √ √ √ √ √

7-1/2" Adaptor √ √ √ √ √ √ √ √ √ √ √ √ √

Ordering your Schluter

-KERDI-DRAIN

Schluter

-KERDI-DRAIN flanges and grates are sold separately.

Note: When using a flange with a 3" outlet, a 6" grate is recommended. When using the flange with 5-1/4" adaptor ring, the 4" tileable grate and 6"

round and square grates are not suitable. Refer to the table below to verify the compatibility of your selected flange/grate combination.

Select your grateSelect the flange appropriate for your application

1 2

Grates

Flanges

Schluter

-KERDI-DRAIN - Listings and Certifications

Grate - 4" (100 mm) Grate - 6" (150 mm)

Stainless steel Anodized aluminum

STYLE

Brushed stainless steel

Stainless steel

Stainless

steel

Chrome

Bronze

EOB

Tileable

ECS

Copper

AKGB

Brass

AMGB

Nickel

ATGB

Pure Curve Floral

Square

Round

6RE

Cover

6CE

2" PVC 1 1 - 1 1 1 1 1 1 1 1 1 2

2" ABS 1 1 - 1 1 1 1 1 1 1 1 1 2

2" PVC Horizontal 3 3 - 3 3 3 3 3 3 3 3 3 3

2" ABS Horizontal 3 3 - 3 3 3 3 3 3 3 3 3 3

2" Stainless steel 1 1 - 1 1 1 1 1 1 1 1 1 2

2" Stainless steel

Threaded

1 1 - 1 1 1 1 1 1 1 1 1 2

3" PVC - - - - - - - - - - 1 1 2

3" ABS - - - - - - - - - - 1 1 2

3" Stainless steel - - - - - - - - - - 1 1 2

5-1/4" Adaptor - - - - - - - - - - - - -

7-1/2" Adaptor - - - - - - - - - - - - -

Grates

Flanges

Various configurations of KERDI-DRAIN are listed by ICC-ES (Report No. PMG-1204), UPC® and CSA as shown in the table above.

1 - Listed by ICC-ES (Report No. PMG-1204), UPC® and CSA.

2 - Listed by CSA

3 - CSA, UPC, and ICC-ES listings in progress, please check www.schluter.ca for the most up-to-date information.

For copies of these documents, please contact Schluter

-Systems at 800-667-8746 or by email at info@schluter.com. Links to the documents can also be accessed at

www.schluter.com.

Summary of content (17 pages)

PAGE 1
FLOOR DRAINS Ordering your Schluter®-KERDI-DRAIN Schluter®-KERDI-DRAIN flanges and grates are sold separately. 1 2 Select the flange appropriate for your application Select your grate Note: When using a flange with a 3" outlet, a 6" grate is recommended. When using the flange with 5-1/4" adaptor ring, the 4" tileable grate and 6" round and square grates are not suitable. Refer to the table below to verify the compatibility of your selected flange/grate combination.
PAGE 2
FLOOR DRAINS Product Item Numbers 8.
PAGE 3
FLOOR DRAINS Schluter®-KERDI-DRAIN ABS or PVC FLANGE — 2" or 3" OUTLET 2" (50 mm) drain outlet Material 3" (75 mm) drain outlet Item No. Material Item No. KD2 FLK ABS KD3 FLK ABS ABS ABS KD2 FLK PVC KD3 FLK PVC PVC PVC Additional components included 4x Inside corners 2x 1x 1x Pipe seal (3/4" - 20 mm) Outside corners Mixing valve seal (4-1/2" - 114 mm) Flange measurements ABS or PVC i When using a flange with 3" outlet, a 6" grate is recommended.
PAGE 4
FLOOR DRAINS Schluter®-KERDI-DRAIN STAINLESS STEEL FLANGE — 2" or 3" OUTLET 2" (50 mm) drain outlet 3" (75 mm) drain outlet Material Item No. Material Item No. KD2 FLK E KD3 FLK E No-hub No-hub KD2 FLK ETH Threaded Additional components included 4x Inside corners 2x Outside corners 1x 1x Pipe seal (3/4" - 20 mm) Mixing valve seal (4-1/2" - 114 mm) 1x KERDI-FIX sealing and bonding compound (3.
PAGE 5
FLOOR DRAINS Schluter®-KERDI-DRAIN-H ABS or PVC FLANGE — 2" OUTLET HORIZONTAL 2" (50 mm) drain outlet Material Item No. KDH2 FLK ABS ABS KDH2 FLK PVC PVC Additional components included 4x 2x Inside corners 1x 1x Pipe seal (3/4" - 20 mm) Outside corners Mixing valve seal (4-1/2" - 114 mm) Flange measurements ABS or PVC 2" (50 mm) horizontal drain outlet A B A D C E F 11-13/16" - 300 mm B 4-21/32" - 118.3 mm C 2-47/64" - 69.5 mm D 2-3/8" - 60.5 mm E 3-3/8" - 85.
PAGE 6
FLOOR DRAINS Schluter®-KERDI-DRAIN-A ADAPTOR KIT — 5-1/4" or 7-1/2" ADAPTOR RING Schluter®-KERDI-DRAIN ADAPTOR KITS are used to convert traditional clamping ring drains to integrated bonding flange drains when removal of the clamping ring drain is not practical. A stainless steel adaptor ring with an overmolded rubber gasket replaces the clamping ring and is sealed to the existing drain body using Schluter®-KERDI-FIX.
PAGE 7
FLOOR DRAINS Schluter®-KERDI-DRAIN GRATES FOR USE WITH FLANGES WITH 2" OUTLET 4" (100 mm) Grate ® W! Schluter -KERDI-DRAIN-STYLE NE Curve Floral Brushed stainless steel Brushed stainless steel Brushed stainless steel Item No. Item No. Item No. KDIF4 GRK EBD6 U.S. Patent No. D831,171 KDIF4 GRK EBD5 U.S. Patent No. D831,172 Pure KDIF4 GRK EBD8 U.S. Patent No. D831,795 Stainless steel Stainless steel Chrome Oil-rubbed bronze Item No. Item No. Item No.
PAGE 8
FLOOR DRAINS Schluter®-KERDI-DRAIN GRATES FOR USE WITH FLANGES WITH 2" OUTLET 4" (100 mm) Grate Tileable grate Tileable grate Item No. KD4 GRK ECS Patent pending Contents 1x 1x Spacer Tileable covering support GRATES FOR USE WITH FLANGES WITH 2" or 3" OUTLET 6" (150 mm) Grate Stainless steel Stainless steel - 6" square Stainless steel - 6" round Item No. Item No.
PAGE 9
FLOOR DRAINS Schluter®-KERDI-DRAIN DRAIN KITS — ABS or PVC FLANGE - 2" OUTLET - STAINLESS STEEL GRATE Schluter®-KERDI-DRAIN ABS - 2" (50 mm) PVC - 2" (50 mm) 4" (100 mm) square grate Stainless steel KD2/ABS/E KD2/PVC/E Contents 1x 1x Grate and frame Flange 4x Inside corners 2x Outside corners 1x Height adjustment collar 1x Pipe seal (3/4" - 20 mm) 1x Lateral adjustment ring 1x Mixing valve seal (4-1/2" - 114 mm) ADAPTOR KIT — 5-1/4" ADAPTOR RING - 4" STAINLESS STEEL GRATE 5-1/4" (133.
PAGE 10
FLOOR DRAINS Schluter®-KERDI-DRAIN ABS or PVC FLANGE — 2" or 3" OUTLET - WITHOUT SEALS AND CORNERS 2" (50 mm) drain outlet Material 3" (75 mm) drain outlet Item No. Material Item No. KD2/ABS/FL KD3/ABS/FL ABS ABS KD2/PVC/FL KD3/PVC/FL PVC PVC HORIZONTAL ABS or PVC FLANGE — 2" OUTLET - WITHOUT SEALS AND CORNERS 2" (50 mm) drain outlet Material Item No. $ / Unit KDH2/ABS/FL 26.45 KDH2/PVC/FL 26.
PAGE 11
FLOOR DRAINS Schluter®-KERDI-DRAIN 10 PACKS — ABS OR PVC FLANGE - 2" OUTLET 2" (50 mm) drain outlet Additional components included Material Item No. 40x Inside corners KD2 FLK ABS 10 20x Outside corners ABS 10x Pipe seal (3/4" - 20 mm) KD2 FLK PVC 10 10x Mixing valve seal (4-1/2" - 114 mm) PVC Note: 10 packs are packaged in bulk, not individually boxed. 10 PACKS — ABS FLANGE - 5-1/4" ADAPTOR RING 5-1/4" (133.4 mm) adaptor ring Additional components included Flange and ring Item No.
PAGE 12
FLOOR DRAINS Schluter®-KERDI-DRAIN 6" SQUARE CLEAN OUT COVER The Schluter®-KERDI-DRAIN Clean Out Cover is a 6” stainless steel cover available for installations where the KERDIDRAIN bonding flange is to be used in a cleanout application. Clean out cover 6" Item No. Finish KD-GR6C-E Stainless steel TAMPER PROOF SCREWS Schluter ®-KERDI-DRAIN Tamper Proof Screws are designed as a high security accessory for the KERDI-DRAIN.
PAGE 13
FLOOR DRAINS Note: There are multiple selections to be made for this product. Begin by selecting the appropriate channel body length then proceed to grate selection accordingly, keeping in mind there two frame height options for the perforated and closeddesign grates.
PAGE 14
FLOOR DRAINS Schluter®-KERDI-LINE GRATE ASSEMBLY - BRUSHED STAINLESS STEEL CONTENTS 1x 1x Grate 6 design options: • Closed-design • Perforated • Frameless tileable • Curve • Floral • Pure Closed (A) 3/8" 10 mm Grate frame with height adjustment spacers. See product tables for frame height options (not included with frameless tileable grate).
PAGE 15
FLOOR DRAINS Schluter®-KERDI-LINE GRATE ASSEMBLY - CHROME Closed (A) 3/8" 10 mm 1-27/32" 47 mm Perforated (B) 3/8" 10 mm 2-1/8" - 54 mm =H =H 2-29/32" - 74 mm 2-29/32" - 74 mm Grate assemblies - Chrome 3/4" (19 mm) frame height for 1/8" to 9/16" (3 mm to 15 mm) -thick coverings Length = in. - cm 19-11/16 23-5/8 27-9/16 31-1/2 35-7/16 39-3/8 43-5/16 47-1/4 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120 Frameless Tileable (D) Closed (A) Perforated (B) Item No.
PAGE 16
FLOOR DRAINS Schluter®-KERDI-LINE-STYLE GRATE ASSEMBLY - BRUSHED STAINLESS STEEL STYLE DESIGNS 2-29/32" (74 mm) Curve 2-29/32" (74 mm) Floral 4 4 =H Pure 2-29/32" (74 mm) =H 2-1/8" (54 mm) 2-1/8" (54 mm) 2-1/8" (54 mm) Grate assemblies - Brushed stainless steel 29/32" - 23 mm frame height for 1/4" - 11/16" (6 - 18 mm) -thick coverings Length = in. - cm 19-11/16 23-5/8 27-9/16 31-1/2 35-7/16 39-3/8 43-5/16 47-1/4 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120 Curve1 Floral2 Pure3 Item No.
PAGE 17
FLOOR DRAINS Schluter®-KERDI-LINE COVER PLATE Schluter®-KERDI-LINE-FC Schluter®-KERDI-LINE-FC is a stainless steel cover plate for use with the Schluter®KERDI-LINE linear floor drain to create a seamless look in applications where multiple drains are installed end to end. KERDI-LINE-FC is designed for use with either the solid or perforated grates. 3/8'' - 1/2'' (10 - 12.5 mm) 1-3/8'' - 35 mm Schluter®-KERDI-LINE-FC Cover Plate Brushed stainless steel Chrome Item No. Item No.