S HOWE R SY STE M INNOVATIVE SOLUTIONS FOR CERAMIC AND STONE TILE INTEGRATED BONDED WATERPROOFING SYSTEM FOR TILED SHOWERS The Schluter®-Shower System is an integrated family of products that together form a fully bonded, watertight assembly for tiled showers. Unlike shower pan liners in conventional assemblies, bonded waterproof membranes, such as Schluter®-KERDI, bond directly to the mortar bed and protect it from becoming saturated with regular use.
SHOWER SYSTEM Prefabricated Shower Substrates 8.3 Schluter®-KERDI-SHOWER-T/-TS/-TT/-LT/-LTS Property Density Compressive Strength1 Maximum Service Temperature 1 Method Value ASTM D3575 ASTM D1621 - 3.75 lb/ft3 (60 Kg/m3) 80 psi (552 kPa) 175 °F (79 °C) Compressive strength measured at 10% deflection of foam 8.3 Schluter®-KERDI-SHOWER-SR 8.3 Schluter -KERDI-SHOWER -T/-TS/-TT ® 8.3 Schluter®-KERDI-SHOWER -SR/-CB 8.8 Schluter®-KERDI-SHOWER-LT/-LTS 12.1 Schluter® -KERDI-BOARD -SB/-SC 12.
SHOWER SYSTEM Schluter®-KERDI-BOARD-KIT combines all of the necessary components to waterproof the walls of your bathtub and acrylic shower base using waterproof building panels. The kit includes ½" x 48" x 38" (1.25 cm x 122 cm x 97 cm) KERDI-BOARD waterproofing panels, KERDI-BAND, pipe and mixing valve seals, screws and washers, plus 290 ml of KERDI-FIX sealant in bright white. The KERDIBOARD-KIT provides enough KERDI-BOARD to cover up to 101 ft² (9.4 m²) of wall area.
SHOWER SYSTEM Waterproof Building Panel 12.1 Schluter®-KERDI-BOARD Application and Function 12.1 Schluter ®-KERDI-BOARD is a multifunctional tile substrate and building panel, which can also be used for creating bonded waterproofing assemblies with tile coverings. It consists of an extruded polystyrene foam panel, with a special reinforcement material on both sides and fleece webbing for effective anchoring in thin-set mortar.
SHOWER SYSTEM KERDI-DRAIN and KERDI-LINE are designed specifically to ensure a simple and secure connection to bonded waterproof membranes, such as KERDI, at the top of the assembly rather than below it, thereby reducing the risk of leakage, efflorescence, and mold growth. Application and Function 8.2 Schluter®-KERDI-DRAIN is a floor drain specifically designed to allow connections to KERDI or other load-bearing, bonded waterproof membranes.
SHOWER SYSTEM of a stainless steel frame that can be seamlessly adjusted to the thickness of the ceramic tile or stone covering – 1/8" to 1" (3 mm to 25 mm) for standard grate assemblies and 1/4" to 23/32" (6 mm to 18 mm) for style grate assemblies – and stainless steel grates that are placed within the frame. The standard grate assembly frame features a 3/8" (10 mm) wide reveal after installation and can be combined with one of two grate options: Closed (A) or Perforated (B).
SHOWER SYSTEM trapezoid-perforated anchoring legs for installation on walls in conjunction with the tile. Schluter®-SHELF-N is a rectangular shelf that fits the prefabricated Schluter®-KERDIBOARD-SN shower niche. It is installed in conjunction with the tile. Material Properties and Applications Schluter®-SHELF is produced using stainless steel 304 (1.4301 = V2A) and is resistant to most chemicals encountered in tiled environments.
SHOWER SYSTEM that retains uniform appearance during normal use. The surface, however, is susceptible to scratching and wear and may be damaged by grout or setting material. Cementitious materials, in conjunction with moisture, become alkaline. Since aluminum is sensitive to alkaline substances, exposure to the alkali (depending on the concentration and duration of exposure) may result in corrosion (aluminum hydroxide formation).
SHOWER SYSTEM Product Item Numbers 8.3 Schluter®-KERDI-SHOWER-T Item No. KST965/1525 KST1220/1525 KST1220/1830 KST1525 KST1830 Tray with center drain placement Dimensions Perimeter height Drain placement 97 cm x 152 cm (38" x 60") 122 cm x 152 cm (48" x 60") 122 cm x 183 cm (48" x 72") 152 cm x 152 cm (60" x 60") 183 cm x 183 cm (72" x 72") 29 mm (1-1/8") 28 mm (1-3/32") 32 mm (1-1/4") 30 mm (1-3/16") 32 mm (1-1/4") center center center center center 8.3 Schluter®-KERDI-SHOWER-TS Item No.
SHOWER SYSTEM 8.1 Schluter®-KERDI Item No. KERDI 200/5M KERDI 200/7M KERDI 200/10M KERDI 200/20M KERDI 200 Waterproofing membrane Width Length Area Thickness 3' 3" – 1 m 3' 3" – 1 m 3' 3" – 1 m 3' 3" – 1 m 3' 3" – 1 m 16' 5" – 5 m 23' – 7 m 33' – 10 m 65' 7" – 20 m 98' 5" – 30 m 54 ft2 – 5 m2 75 ft2 – 7 m2 108 ft2 – 10 m2 215 ft2 – 20 m2 323 ft2 – 30 m2 8 mil 8 mil 8 mil 8 mil 8 mil Width Length Area Thickness 3' 3" – 1 m 98' 5" – 30 m 323 ft2 – 30 m2 20 mil 8.1 Schluter®-KERDI-DS Item No.
SHOWER SYSTEM 1 6 2 3 4 5 Schluter®-KERDI-BOARD-KIT Includes 1 2 3 4 5 6 KERDI-BOARD KERDI-BAND KERDI-SEAL-PS KERDI-SEAL-MV KERDI-BOARD-ZT/-ZS KERDI-FIX Description Quantity Waterproofing building panel 1/2" x 48" x 38" (1.25 cm x 122 cm x 97 cm) = 101 ft2 (9.4 m²) Waterproofing strip 5" x 98' 5" (125 mm x 30 m) Pipe seal 1/2" (12.5 mm), 3/4" (20 mm) Mixing valve seal 4-1/2" (114 mm) Screws and washers Sealant 9.8 oz (290 ml) 8.1 Schluter®-KERDI-BAND Item No.
SHOWER SYSTEM 8.1 Schluter®-KERDI-KERS Preformed corner Item No. Thickness KERS 20L KERS 28L KERS 20R KERS 28R Packaging 4 mil 4 mil 4 mil 4 mil Left inside corner – 3/4" (20 mm) Left inside corner – 1-3/32" (28 mm) Right inside corner – 3/4" (20 mm) Right inside corner – 1-3/32" (28 mm) 8.1 Schluter®-KERDI-SEAL-PS Item No. KMS185/12 KMS185/20 KMS10185/12 KMS10185/20 Pipe seal with over-molded rubber gasket Pipe nipple opening diam.
SHOWER SYSTEM 8.3 Schluter®-KERDI-FIX Adhesive/sealant Item No. KERDIFIX / color* KERDIFIX 100 G *Color Codes Description BW Cartridge - 9.81 oz — 290 ml Tube - 3.38 oz — 100 ml Bright white G Grey To complete the item number, add the color code (e.g., KERDIFIX/BW). 8.
SHOWER SYSTEM Schluter®-KERDI-DRAIN ABS or PVC FLANGE — 2" or 3" OUTLET 2" (50 mm) drain outlet Material 3" (75 mm) drain outlet Item No. Material Item No. KD2 FLK ABS KD3 FLK ABS ABS ABS KD2 FLK PVC KD3 FLK PVC PVC PVC Additional components included 4x Inside corners 2x 1x 1x Pipe seal (3/4" - 20 mm) Outside corners Mixing valve seal (4-1/2" - 114 mm) Flange measurements ABS or PVC i When using a flange with 3" outlet, a 6" grate is recommended.
SHOWER SYSTEM Schluter®-KERDI-DRAIN STAINLESS STEEL FLANGE — 2" or 3" OUTLET 2" (50 mm) drain outlet 3" (75 mm) drain outlet Material Item No. Material Item No. KD2 FLK E KD3 FLK E No-hub No-hub KD2 FLK ETH Threaded Additional components included 4x Inside corners 2x Outside corners 1x 1x Pipe seal (3/4" - 20 mm) Mixing valve seal (4-1/2" - 114 mm) 1x KERDI-FIX sealing and bonding compound (3.
SHOWER SYSTEM Schluter®-KERDI-DRAIN-H ABS or PVC FLANGE — 2" OUTLET HORIZONTAL 2" (50 mm) drain outlet Material Item No. KDH2 FLK ABS ABS KDH2 FLK PVC PVC Additional components included 4x 2x Inside corners 1x 1x Pipe seal (3/4" - 20 mm) Outside corners Mixing valve seal (4-1/2" - 114 mm) Flange measurements ABS or PVC 2" (50 mm) horizontal drain outlet A B A D C E F 11-13/16" - 300 mm B 4-21/32" - 118.3 mm C 2-47/64" - 69.5 mm D 2-3/8" - 60.5 mm E 3-3/8" - 85.
SHOWER SYSTEM Schluter®-KERDI-DRAIN-A ADAPTOR KIT — 5-1/4" or 7-1/2" ADAPTOR RING Schluter®-KERDI-DRAIN ADAPTOR KITS are used to convert traditional clamping ring drains to integrated bonding flange drains when removal of the clamping ring drain is not practical. A stainless steel adaptor ring with an overmolded rubber gasket replaces the clamping ring and is sealed to the existing drain body using Schluter®-KERDI-FIX.
SHOWER SYSTEM Schluter®-KERDI-DRAIN GRATES FOR USE WITH FLANGES WITH 2" OUTLET 4" (100 mm) Grate ® W! Schluter -KERDI-DRAIN-STYLE NE Curve Floral Brushed stainless steel Brushed stainless steel Brushed stainless steel Item No. Item No. Item No. KDIF4 GRK EBD6 U.S. Patent No. D831,171 KDIF4 GRK EBD5 U.S. Patent No. D831,172 Pure KDIF4 GRK EBD8 U.S. Patent No. D831,795 Stainless steel Stainless steel Chrome Oil-rubbed bronze Item No. Item No. Item No.
SHOWER SYSTEM Schluter®-KERDI-DRAIN GRATES FOR USE WITH FLANGES WITH 2" OUTLET 4" (100 mm) Grate Tileable grate Tileable grate Item No. KD4 GRK ECS Patent pending Contents 1x 1x Spacer Tileable covering support GRATES FOR USE WITH FLANGES WITH 2" or 3" OUTLET 6" (150 mm) Grate Stainless steel Stainless steel - 6" square Stainless steel - 6" round Item No. Item No.
SHOWER SYSTEM Schluter®-KERDI-DRAIN DRAIN KITS — ABS or PVC FLANGE - 2" OUTLET - STAINLESS STEEL GRATE Schluter®-KERDI-DRAIN ABS - 2" (50 mm) PVC - 2" (50 mm) 4" (100 mm) square grate Stainless steel KD2/ABS/E KD2/PVC/E Contents 1x 1x Grate and frame Flange 4x Inside corners 2x Outside corners 1x Height adjustment collar 1x Pipe seal (3/4" - 20 mm) 1x Lateral adjustment ring 1x Mixing valve seal (4-1/2" - 114 mm) ADAPTOR KIT — 5-1/4" ADAPTOR RING - 4" STAINLESS STEEL GRATE 5-1/4" (133
SHOWER SYSTEM Schluter®-KERDI-DRAIN ABS or PVC FLANGE — 2" or 3" OUTLET - WITHOUT SEALS AND CORNERS 2" (50 mm) drain outlet Material 3" (75 mm) drain outlet Item No. Material Item No. KD2/ABS/FL KD3/ABS/FL ABS ABS KD2/PVC/FL KD3/PVC/FL PVC PVC HORIZONTAL ABS or PVC FLANGE — 2" OUTLET - WITHOUT SEALS AND CORNERS 2" (50 mm) drain outlet Material Item No. $ / Unit KDH2/ABS/FL 26.45 KDH2/PVC/FL 26.
SHOWER SYSTEM Schluter®-KERDI-DRAIN 10 PACKS — ABS OR PVC FLANGE - 2" OUTLET 2" (50 mm) drain outlet Additional components included Material Item No. 40x Inside corners KD2 FLK ABS 10 20x Outside corners ABS 10x Pipe seal (3/4" - 20 mm) KD2 FLK PVC 10 10x Mixing valve seal (4-1/2" - 114 mm) PVC Note: 10 packs are packaged in bulk, not individually boxed. 10 PACKS — ABS FLANGE - 5-1/4" ADAPTOR RING 5-1/4" (133.4 mm) adaptor ring Additional components included Flange and ring Item No.
SHOWER SYSTEM Schluter®-KERDI-DRAIN 6" SQUARE CLEAN OUT COVER The Schluter®-KERDI-DRAIN Clean Out Cover is a 6” stainless steel cover available for installations where the KERDIDRAIN bonding flange is to be used in a cleanout application. Clean out cover 6" Item No. Finish KD-GR6C-E Stainless steel TAMPER PROOF SCREWS Schluter ®-KERDI-DRAIN Tamper Proof Screws are designed as a high security accessory for the KERDI-DRAIN.
SHOWER SYSTEM Note: There are multiple selections to be made for this product. Begin by selecting the appropriate channel body length then proceed to grate selection accordingly, keeping in mind there two frame height options for the perforated and closeddesign grates.
SHOWER SYSTEM Schluter®-KERDI-LINE GRATE ASSEMBLY - BRUSHED STAINLESS STEEL CONTENTS 1x 1x Grate 6 design options: • Closed-design • Perforated • Frameless tileable • Curve • Floral • Pure Closed (A) 3/8" 10 mm Grate frame with height adjustment spacers. See product tables for frame height options (not included with frameless tileable grate).
SHOWER SYSTEM Schluter®-KERDI-LINE GRATE ASSEMBLY - CHROME Closed (A) 3/8" 10 mm 1-27/32" 47 mm Perforated (B) 3/8" 10 mm 2-1/8" - 54 mm =H =H 2-29/32" - 74 mm 2-29/32" - 74 mm Grate assemblies - Chrome 3/4" (19 mm) frame height for 1/8" to 9/16" (3 mm to 15 mm) -thick coverings Length = in. - cm 19-11/16 23-5/8 27-9/16 31-1/2 35-7/16 39-3/8 43-5/16 47-1/4 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120 Frameless Tileable (D) Closed (A) Perforated (B) Item No.
SHOWER SYSTEM Schluter®-KERDI-LINE-STYLE GRATE ASSEMBLY - BRUSHED STAINLESS STEEL STYLE DESIGNS 2-29/32" (74 mm) Curve Floral 4 2-29/32" (74 mm) 4 =H Pure 2-29/32" (74 mm) =H 2-1/8" (54 mm) 2-1/8" (54 mm) 2-1/8" (54 mm) Grate assemblies - Brushed stainless steel 29/32" - 23 mm frame height for 1/4" - 11/16" (6 - 18 mm) -thick coverings Length = in. - cm 19-11/16 23-5/8 27-9/16 31-1/2 35-7/16 39-3/8 43-5/16 47-1/4 - 50 - 60 - 70 - 80 - 90 - 100 - 110 - 120 Curve1 Floral2 Pure3 Item No.
SHOWER SYSTEM Schluter®-KERDI-LINE PERFORATED GRATE WITH LOCKING MECHANISM The Schluter®-KERDI-LINE perforated grate assembly (B) with 3/4" (19 mm) frame height is available with a locking mechanism for applications where tamper resistance is required. Perforated grate assembly with locking mechanism Length = in. - cm 19-11/16 23-5/8 27-9/16 31-1/2 35-7/16 39-3/8 43-5/16 47-1/4 51-3/16 55-1/8 59-1/16 62-15/16 66-7/8 70-13/16 Item No.
5 mm) or 0 mm) SHOWER SYSTEM 14.1 Schluter®-SHOWERPROFILE-SA Item No. H = in. - mm L = 47-1/4" - 1.2 m SPSA 50 EB/120 L = 63" - 1.6 m SPSA 50 EB/160 L = 78-3/4" - 2 m SPSA 50 EB/200 H = 3/16" (5 mm) or 3/8" (10 mm) 3/8" (10 mm) 3/8" (10 mm) (12.5 mm) 1/4 - 6 1-3/16 - 30 3/16 - 5 1/4 - 6 1-1/2 - 38 3/16 - 5 1/4 - 6 1-13/16 - 46 H = in. - mm L = 47-1/4" - 1.2 m SPSB 100 EB/120 SPSB 125 EB/120 L = 63" - 1.
SHOWER SYSTEM 17.1 Schluter®-SHELF-E Corner shelf Brushed stainless steel Item No.
SHOWER SYSTEM 1 7 3 3 8 6 2 4 6 5 4 1 5 2 7 8 Schluter®-KERDI-SHOWER-KIT Includes 2 3 4 5 6 7 8 KERDI-SHOWER-T/-TS/-TT KERDI-BOARD-SC KERDI-BOARD-SC KERDI 10 M KERDI-BAND KERDI-DRAIN KERDI-KERECK-F KERDI-SEAL-PS KERDI-SEAL-MV Shower Tray Shower Curb 48" x 6" x 4-1/2" Shower Curb 38" x 6" x 4-1/2" Waterproofing membrane 3' 3" x 33' = 108 ft2 Waterproofing strip 5" x 33' Flange with 2" (50 mm) outlet and stainless steel grate (E) 1 1 152 cm - 60" 97 cm - 38" 122 cm - 48" Grate finish AB
SHOWER SYSTEM 7 3 1 3 8 6 5 4 1 4 2 5 2 6 8 7 Schluter®-KERDI-SHOWER-KIT - WITHOUT THE GRATE Includes 1 2 3 4 5 6 7 8 KERDI-SHOWER-T/-TS/-TT KERDI-BOARD-SC KERDI-BOARD-SC KERDI 5 M KERDI 10 M KERDI 12 M KERDI-BAND KERDI-DRAIN Flange KERDI-KERECK-F KERDI-SEAL-PS KERDI-SEAL-MV 48" x 48" 38" x 60" 48" x 72" 72" x 72" Shower Tray Shower Curb 48" x 6" x 4-1/2" Shower Curb 38" x 6" x 4-1/2" Waterproofing membrane 3' 3" x 16' 5" = 54 ft2 Waterproofing membrane 3' 3" x 33' = 108 ft2 Waterproofing me
SHOWER SYSTEM 1 3 3 4 1 2 2 4 Schluter®-KERDI-SHOWER-KIT - WITHOUT THE DRAIN Includes 1 2 3 4 KERDI-SHOWER-T/-TS/-TT KERDI-BOARD-SC KERDI-BOARD-SC KERDI 5 M KERDI 10 M KERDI 12 M KERDI-BAND Description Shower Tray Shower Curb 48" x 6" x 4-1/2" Shower Curb 38" x 6" x 4-1/2" Waterproofing membrane 3' 3" x 16' 5" = 54 ft2 Waterproofing membrane 3' 3" x 33' = 108 ft2 Waterproofing membrane 3' 3" x 39' 4" = 128 ft2 Waterproofing strip 5" x 33' Tray size 48" 38" 38" 48" 72" 33 x x x x x 48" 60" 60"
SHOWER SYSTEM Schluter®-KERDI-TUBKIT 1 Item No.
SHOWER SYSTEM Schluter®-Shower System 10-Year Limited Warranty LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Schluter®-Shower System 10-Year Limited Warranty (the “Limited Warranty”), Schluter Systems warrants that its Schluter®-Shower System (the “Products”) will be free from manufacturing defects and will perform as described in the Schluter®-Shower System Installation Handbook and Schluter® Waterproofing Membranes Technical Data Sheet (collectively, the “Written
Schluter®-Systems Lifetime Thin-Set System Extended Limited Warranty LIMITED WARRANTY COVERAGE: Subject to the conditions and limitations as stated in this Lifetime Thin-Set System Extended Limited Warranty (the “Limited Warranty”), Schluter Systems warrants that a Thin-Set System (defined hereafter) will be free from manufacturing defects and will perform as described in the applicable installation handbook(s) and/or technical data sheet(s) (collectively, the “Written Materials1” ) for the lifetime (define