Installation Guide

Schluter
®
-KERDI-LINE
KERDI-LINE is a low profile linear floor drain specifically designed for bonded
waterproofing assemblies. KERDI-LINE can be installed adjacent to walls or at
intermediate locations in showers, wet rooms, and other applications that require
waterproofing and drainage. The floor can be sloped on a single plane to KERDI-LINE,
which enables the use of large-format tiles and creates interesting design opportunities.
The KERDI-LINE channel body is made of formed stainless steel and features a collar
made of Schluter
®
-KERDI for a secure waterproof connection. The grate assembly is
available in three design options. Grate and frame assemblies (A and B) are available
in brushed stainless steel, or stainless steel with chrome finish, and can be adjusted
for use with tile coverings from 1/8" to 1" (3 mm to 25 mm)-thick. The tileable covering
support can accommodate any thickness of tile covering.
Note: There are multiple selections to be made for this product. Start by selecting the
appropriate flange length then proceed to grate selection accordingly, keeping in mind
there are two frame height options and three grate options.
= H
3/8" -
10 mm
1-27/32" -
47 mm
2-29/32" - 74 mm
Wall placement
= L
= L 1
Channel body with center outlet
8" - 20.3 cm
= L
= L
1
Channel body with off-set outlet
KERDI-LINE linear floor drain
Channel body - stainless steel
L =
in. - cm
L
1
=
in. - cm
Center outlet Off-set outlet
19-11/16 - 50 21-11/16 - 55 KLV 60 E 50 -
23-5/8 - 60 25-5/8 - 65 KLV 60 E 60 -
27-9/16 - 70 29-9/16 - 75 KLV 60 E 70 KLVO 60 E 70
31-1/2 - 80 33-1/2 - 85 KLV 60 E 80 KLVO 60 E 80
35-7/16 - 90 37-7/16 - 95 KLV 60 E 90 KLVO 60 E 90
39-3/8 - 100 41-3/8 - 105 KLV 60 E 100 KLVO 60 E 100
43-5/16 - 110 45-5/16 - 115 KLV 60 E 110 KLVO 60 E 110
47-1/4 - 120 49-1/4 - 125 KLV 60 E 120 KLVO 60 E 120
51-3/16 - 130 53-3/16 - 135 KLV 60 E 130 -
55-1/8 - 140 57-1/8 - 145 KLV 60 E 140 -
59-1/16 - 150 61-1/16 - 155 KLV 60 E 150 -
62-15/16 - 160 64-15/16 - 165 KLV 60 E 160 -
66-7/8 - 170 68-7/8 - 175 KLV 60 E 170 -
70-13/16 - 180 72-13/16 - 185 KLV 60 E 180 -
Closed (A) – Brushed stainless steel
Closed (A) – Chrome
= H
3/8" -
10 mm
2-1/8" - 54 mm
2-29/32" - 74 mm
Perforated (B) – Brushed stainless steel Curve
Perforated (B) – Chrome Floral
Pure
2" - 50 mm
Frameless Tileable (D)
W = 2-1/4" W = 2-1/4"
W1 = 3-7/8" W1 = 3-7/8"
KERDI-LINE linear floor drain
Length =
in. - cm
Curve Floral Pure
Frame =
29/32" - 23 mm
Frame =
29/32" - 23 mm
Frame =
29/32" - 23 mm
19-11/16 - 50 KLIFF 23 EB 50 KLIFE 23 EB 50 KLIFG 23 EB 50
23-5/8 - 60 KLIFF 23 EB 60 KLIFE 23 EB 60 KLIFG 23 EB 60
27-9/16 - 70 KLIFF 23 EB 70 KLIFE 23 EB 70 KLIFG 23 EB 70
31-1/2 - 80 KLIFF 23 EB 80 KLIFE 23 EB 80 KLIFG 23 EB 80
35-7/16 - 90 KLIFF 23 EB 90 KLIFE 23 EB 90 KLIFG 23 EB 90
39-3/8 - 100 KLIFF 23 EB 100 KLIFE 23 EB 100 KLIFG 23 EB 100
43-5/16 - 110 KLIFF 23 EB 110 KLIFE 23 EB 110 KLIFG 23 EB 110
47-1/4 - 120 KLIFF 23 EB 120 KLIFE 23 EB 120 KLIFG 23 EB 120
Intermediate placement
5-15/32" - 137 mm
2-1/4" -
57 mm
7/8" -
22 mm
7/8" -
22 mm
15/16" - 24 mm
4-23/32" - 120 mm
2-1/4" -
57 mm
7/8" -
22 mm
7/8" -
22 mm
15/16" - 24 mm
48 PRODUCT & ORDERING INFO