Use and Care Manual

FLOOR DRAINS
9
Grate Kits
Finish Item No.
4" (100 mm) Square Grate
Tileable covering support (ECS)* KD2/ECS/GR
Stainless steel (E) KD2/E/GR
Oil-rubbed bronze stainless steel (EOB) KD2/EOB/GR
Brushed brass anod. alu. (AMGB) KD2/AMGB/GR
Brushed copper anod. alu. (AKGB) KD2/AKGB/GR
Brushed nickel anod. alu. (ATGB) KD2/ATGB/GR
Stainless steel (E)
with stainless steel height adjustment collar and
lateral adjustment ring
KD2/E/E/GR
6" (150 mm) Square or Round Grate
Square grate stainless steel (6E) KD2/6E/GR
Round grate stainless steel (6RE) KD2/6RE/GR
6" (150 mm) Square or Round Cover
Square cover stainless steel (6CE) KD-GR6C-E
Round cover stainless steel (6RCE) KD-GR6RC-E
Grate Kit - Components
Includes Description Quantity
Grate Assembly
a) For stainless steel and aluminum grates
1
b) For tileable covering support
KERDI-KERECK-F Preformed waterproofing corners
4 inside and
2 outside
KERDI-SEAL-PS Pipe seal (3/4" - 20 mm) 1
KERDI-SEAL-MV Mixing valve seal 1
2
3
4
1a
43
2
Flange Kit - Components
Includes Quantity
Drain with integrated bonding flange 1
GRATE & FLANGE KITS (sold separately)
1b
1a
1b
i
Please note that flanges with 3" outlets are intended for
use with 6" grates as these combinations have listings and
certifications while flanges with 3" outlet combined with 4"
grates do not. Please refer to the Listings and Certifications
table on page 14.
Patent pending
Note: 6" square and round covers do not include the seals and corners.
* Patent pending
Flange Kits
Material Item No.
2" (50 mm) Drain Outlet
ABS KD2/ABS/FL
PVC KD2/PVC/FL
Stainless Steel
with no-hub outlet
KD2/E/FL
Stainless Steel
with threaded outlet
KD2/ETH/FL
3" (75 mm) Drain Outlet
ABS KD3/ABS/FL
PVC KD3/PVC/FL
Stainless Steel
with no-hub outlet
KD3/E/FL