Use and Care Manual

16
WALL AND COUNTERTOP PROFILES
Length =
2.5 m - 8' 2-1/2"
Brushed brass anod. alu. (AMGB)
H =
mm - in.
Profile Outside corner, 90º Inside corner, 90º Connector
6 - 1/4 RO 60 AMGB EV/RO 60 AMGB IV/RO 60 AMGB V/RO 60
8 - 5/16 RO 80 AMGB EV/RO 80 AMGB IV/RO 80 AMGB V/RO 80
10 - 3/8 RO 100 AMGB EV/RO 100 AMGB IV/RO 100 AMGB V/RO 100
12.5 - 1/2 RO 125 AMGB EV/RO 125 AMGB IV/RO 125 AMGB V/RO 125
Length =
2.5 m - 8' 2-1/2"
Graphite anod. alu. (AGR)
H =
mm - in.
Profile Outside corner, 90º Inside corner, 90º Connector
6 - 1/4 RO 60 AGR EV/RO 60 AGR IV/RO 60 AGR V/RO 60
8 - 5/16 RO 80 AGR EV/RO 80 AGR IV/RO 80 AGR V/RO 80
10 - 3/8 RO 100 AGR EV/RO 100 AGR IV/RO 100 AGR V/RO 100
12.5 - 1/2 RO 125 AGR EV/RO 125 AGR IV/RO 125 AGR V/RO 125
Length =
2.5 m - 8' 2-1/2"
Bright black anod. alu. (AGSG)
H =
mm - in.
Profile Outside corner, 90º Inside corner, 90º Connector
6 - 1/4 RO 60 AGSG EV/RO 60 AGSG IV/RO 60 AGSG V/RO 60
8 - 5/16 RO 80 AGSG EV/RO 80 AGSG IV/RO 80 AGSG V/RO 80
10 - 3/8 RO 100 AGSG EV/RO 100 AGSG IV/RO 100 AGSG V/RO 100
12.5 - 1/2 RO 125 AGSG EV/RO 125 AGSG IV/RO 125 AGSG V/RO 125
H =
mm - in.
Double-leg
outside corner, 90º
Double-leg
inside corner, 90º
8 - 5/16 E2L/RO 80 AGSG I2L/RO 80 AGSG
10 - 3/8 E2L/RO 100 AGSG I2L/RO 100 AGSG
12.5 - 1/2 E2L/RO 125 AGSG I2L/RO 125 AGSG
H =
mm - in.
Double-leg
outside corner, 90º
Double-leg
inside corner, 90º
8 - 5/16 E2L/RO 80 AGR I2L/RO 80 AGR
10 - 3/8 E2L/RO 100 AGR I2L/RO 100 AGR
12.5 - 1/2 E2L/RO 125 AGR I2L/RO 125 AGR
H =
mm - in.
Double-leg
outside corner, 90º
Double-leg
inside corner, 90º
8 - 5/16
E2L/RO 80 AMGB I2L/RO 80 AMGB
10 - 3/8 E2L/RO 100 AMGB I2L/RO 100 AMGB
12.5 - 1/2 E2L/RO 125 AMGB I2L/RO 125 AMGB
Schluter
®
-RONDEC
Length =
2.5 m - 8' 2-1/2"
Polished brass anod. alu. (AMG)
H =
mm - in.
Profile Outside corner, 90º Inside corner, 90º Connector
6 - 1/4 RO 60 AMG EV/RO 60 AMG IV/RO 60 AMG V/RO 60
8 - 5/16 RO 80 AMG EV/RO 80 AMG IV/RO 80 AMG V/RO 80
10 - 3/8 RO 100 AMG EV/RO 100 AMG IV/RO 100 AMG V/RO 100
12.5 - 1/2 RO 125 AMG EV/RO 125 AMG IV/RO 125 AMG V/RO 125
H =
mm - in.
Double-leg
outside corner, 90º
Double-leg
inside corner, 90º
8 - 5/16 E2L/RO 80 AMG I2L/RO 80 AMG
10 - 3/8 E2L/RO 100 AMG I2L/RO 100 AMG
12.5 - 1/2 E2L/RO 125 AMG I2L/RO 125 AMG