Use and Care Manual

11
The unit’s Auto Defrost feature should prevent ice accumulation from occurring.
However, should ice accumulation occur, you can do the following:
- Unplug the Wine Cooler
- Wait for all ice to melt
- Once melting is complete, remove water from the unit
- Plug in and restart the unit
TO CLEAN THE EXTERIOR:
Unplug before cleaning.
Do not use abrasive cleaning products.
Wash the cabinet exterior only with mild soap and water and rinse thoroughly.
Clean the glass door with glass cleaner or mild soap and water and a soft cloth.
Wipe the control panel with a damp cloth and dry thoroughly. To avoid damaging the panel, do not
use cleaning sprays or over-saturated.
TO CLEAN THE INTERIOR:
Unplug before cleaning.
Do not use abrasive cleaning products.
Cleaning the door gasket:
- Use mild soap or baking soda solution
- Rinse well
- Apply a thin layer of petroleum jelly to the gasket at the hinge
side to prevent sticking
Use a warm water and baking soda solution inside the unit (about one tablespoon of baking soda to one
quart of water) to clean and neutralize odors.
DE-ICING THE WINE COOLER
CLEANING THE WINE COOLER