Datasheet

51
11
L LLb
MINISCALE PLUS Options
10.2 / 11.1 / 11.2 MINISCALE PLUS Options
L = Length of the (longer) carriage in mm
Lb = Carriage spacing in mm
11.1PushForceDened(VD)
Demanding applications may only be possible if the guideway has a defined push
force. These parameters can be defined by SCHNEEBERGER according to
customer specifications. Carriages and guideways arethen matched and delivered
as a set.
11.2Height-matchedCarriages(HA)
In accuracy class G1, the maximum height deviation of the carriages is ±10 µm.
This tolerance can be too large for certain configurations, for example when the
distances among the individual carriages is too small, i.e. when the carriage
spacing L
b is smaller than the carriage length L. In such cases, the tolerances can
be reduced on a customer-specific basis.