Datasheet
36
9
MINIRAIL Accessories
9.1 Plastic Plugs (MNK)
Plastic plugs in the guideway attachment holes prevent accumulations of dirt.
Rail length Plastic plugs The plastic plugs can be used with the following
types of screws
Type DIN 7984 DIN 7380
7 MNK 4 - x
9 MNK 6 - x
12 MNK 6 x x
15 MNK 6 x x
14 MNK 6 - x
18 MNK 6 x x
24 MNK 8 x x
42 MNK 8 x x
9.2 Wipers (AS, AL and OA)
9.2.1 Standard
The wiper brushes across guideway surfaces and tracks and provides optimal
protection against contamination.
9.2.2 Alternatives
Clearance wiper (AS)
These precisely finished clearance wipers prevent the migration of dirt particles
without affecting the push force of the carriage. The AS wiper is used as standard
for the LUBE-S option (see chapter 8.1).
Smooth-running wiper (AL)
A compromise between the standard wiper and the type AS clearance wiper.
Cleans the tracks and seals off the guideway surfaces by means of a gap. Only for
sizes 7, 9, 12 and 15.
Without wipers (OA)
Without wipers; for use in vacuums, among other applications
9.3 Relubrication Set (MNW)
A relubrication set with KLÜBER Structovis GHD allows the MINIRAIL carriages to
be lubricated via the two lubrication holes in the wipers.
Plastic plugs for sealing the attachment holes
Standard wiper (blue contour = contact surface)
Clearance wiper (AS)
Smooth-running wiper (AL) (blue contour = contact
surface)
Relubrication set (MNW), contents 7 ml