Hardware reference guide

Power Supplies
112
35013379 02 October 2007
Specifications The following table shows the specifications for the CPS52400 125 VDC power
supply module.
Specifications
Input Requirements
Input Voltage 100 ... 150 Vdc including ripple
Input Current 0.5 A @ 125 Vdc
Inrush Current 28 A @ 125 Vdc
Input Power Interruption 1.0 ms max
Fusing (external) 2 A slo-blo recommended (Part # 57-0089-000 or
equivalent)
Output to Bus
Voltage 5.1 Vdc
Maximum Current 8 A @ 60° C
Minimum Current None required
Protection Over Current, Over Voltage
General
Field Wiring Connector
(included)
7 point terminal strip (Part # 043506325)
Internal Power Dissipation 6.0 + 1.5 x |
OUT
= Watts (where |
OUT
is in Amperes)
Operating Mode Standalone / Redundant
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com