Hardware reference guide

CPU Modules
214
35013379 02 October 2007
140CPU53414B CPU Module
Overview This unit provides information on the specifications, LED indicators and description
and error codes for the 140CPU53414B Controller Module.
This module is functionally identical to the non-"B" version, however, the following
should be considered:
z If you are using the module in a Hot Standby topology, then you must use either
two non-"A", or two "A" or two "B" models.
z The "B" version requires a new flash executive.
z The "B" version, "A" version and non-"A" flash executives are not
interchangeable.
z Schneider Automation software (Concept, ProWORX, and Modsoft) supports the
"B" version.
CPU Module The following figure shows the CPU Module and its components.
Modbus Comm 1
Date
Installed
Batt.
Modbus
Comm 1
Network
Node
Customer Identification Label
(Fold label and place it inside
door) Part #31002249
Removable door
Part #043513804
Model Number
Module Description
Color Code
LED
Area
Battery
Key Switch
Modbus
Connector
140
CPU 534 14A
586 CONTROLLER
Modbus
Connector
Modbus Plus
Connector
Modbus Comm 2
Modbus Plus
Slide
Switch
Modbus
Plus
ASCII
RTU
mem
X
Modbus
Comm 2
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com