Hardware reference guide

Quantum Field Bus Modules
35013379 02 October 2007 255
Auxiliary
LonWorks
Communication
Port
This is the auxiliary interface for wiring into a LonWorks network. The connector is
an eight position RJ-45 (phone jack) socket. The figure below shows the Pin 1
connector.
Note: The Auxiliary LonWorks Communications Port is not intended to be
connected to any public telecommunications network.
Both the Primary and Secondary ports provide standard interfaces to LonWorks
networks and are wired in parallel for flexibility. The connections are not polarity
sensitive.
Pin 1
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com