Hardware reference guide

I/O Modules
35013379 02 October 2007 567
Module Zoom
Selections
(Outputs)
Push <Enter> to display and select the mode for the outputs after a communication’s
timeout. This mode is selected for each channel. The following figure shows the
module zoom selections (outputs).
Channel X Output State:
Not installed = Disabled with output current equal to
0 for all conditions. No error generated for this
channel.
Channel X User Defined Output Value: 0 DEC
Not Installed
Last Value
User Defined
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com