Hardware reference guide

I/O Modules
35013379 02 October 2007 719
Module Zoom
Selections
(Inputs)
Push <Enter> to display and select the input type. This selection appears if the
module is I/O mapped to a 3x register and one 4x register.
I/O Map
Assignment
(Outputs)
The modules listed above can be configured as 8 0x references or as 1 output (4x)
register in the following format.
I/O Map Status
Byte (Outputs)
The two least significant bits in the output I/O map status byte are used as follows.
Modsoft Module
Zoom Selections
(Outputs)
Push <Enter> to display and select the output type and the timeout state for the
module. Timeout state is assumed when system control of the module is stopped.
BIN
BCD
input Type:
12345678
12345678
Group B fault
Group A fault
BIN
BCD
Last Value
User Defined
Timeout State:
Output Type:
User Defined Timeout State Points 1-8: 00000000
This document provided by Barr-Thorp Electric Co., Inc. 800-473-9123 www.barr-thorp.com