User manual

Address Server Configuration/Faulty Device Replacement
220
33002479 06 07/2008
Choosing
Options
The Address Server Configuration page allows you to choose different options for
adding or altering the configurations of your NOE. The options available to you are:
z select an entry
z add an entry
z change an entry
z delete an entry
Below we describe the method and options chosen to perform any of the four
options listed above. Screen shots are presented to accompany the Adding an entry
section.
Selecting an Entry When the page displays, by default no entries are selected.
Use the radio buttons in the first column to select an entry. Only one entry may
be selected at a time.
Adding an Entry When the Add a New Entry button is selected, the Address
Server Node Configuration page appears. This page displays information
about a device.
If you selected a device, this page displays the device’s configuration.
Configuration information appears in four of the five fields of the dialog box. Only
the Role information field is blank. You should enter a Role name, for example
ENT_7.
If no device is selected, default values appear in all the fields.
Changing an Entry Before using this button, you must select an entry in the
database by choosing one of the radio buttons in the first column. If you fail to
choose an entry, an error message appears.
When the Change an Entry button is selected, the Address Server Node
Configuration page appears. The information displayed is for the device
selected.
Role Name:
Device Mac address:
Device IP address:
Subnet Mask:
Gateway:
Show Address Server Configuration
Add the Entry Reset the Form
ENT_7
139.160.234.172
139.160.134.1
255.255.254.0
Address Server Node Configuration