User manual

Embedded Web Pages
33002479 06 07/2008 281
SNMP Configuration
Overview This topic describes SNMP configuration for the Quantum Ethernet module through
the SNMP Configuration page.
SNMP
Configuration
Page
Click the SNMP link in the Setup home page to display the Configure SNMP page:
The following table describes the SNMP configuration tasks that you can perform
through the Web page:
Task How To
To display the current SNMP configuration Click Show SNMP Configuration
To clear the fields Click Reset the Form
To change the SNMP configuration Change the information on the page and click
Update SNMP
System Name: 140-NOE-771-01 Module
System Description: Quantum Ethernet TCP/IP Communications Module
Managers IP Addresses
Manager I:
Community Security
Manager II:
Location [SysLocation]:
Contact [SysContact]:
Set:
Get:
Trap:
Authentication Failure Trap Enabled
NonTriv1
NonTriv2
NonTriv3
192.168.1.100
0.0.0.0
Test_Setup_1
Julien
Agent
Show SNMP ConfigurationReset the Form Update SNMP
SNMP Configuration