User manual

Installation and Configuration
33002479 06 07/2008 361
Assigning an IP
Address to the
140 NOE 771 01
Module
Perform the following steps to assign an IP address to the 140 NOE 771 01
communication module.
Step Action
1 Locate the Communications\Networks directory in the Project browser.
2 Double-click your new logical network (NOE77101 in our example) to open the
NOE077101 configuration screen.
3 Click Configured in the IP Address Configuration group (circled area shown
above).
Note: Be sure to contact your network administrator and request the IP,
Subnetwork mask, and Gateway addresses prior to performing the next step.
4 Enter the appropriate values in the IP address, Subnetwork mask, and Gateway
address text fields.
5 Click the validate check box in the upper tool bar to confirm the IP configuration
settings.
g()
IP Configuration Messaging IO Scanning Global Data
IP address configuration
Configured
IP address
192 . 168 . 1 . 200
255 . 255 . 255 . 0
Subnetwork mask
0 . 0 . 0 . 0
Gateway address
From a server
Ethernet configuration
Ethernet II
802.3
Validate check box