User manual

Installation and Configuration

33002479 06 07/2008 367

Connecting the

PC to the PLC

with a USB Cable

Proceed as follows to connect the PC to the PLC with USB.

Step Action

1 Ensure that the Quantum system is powered up.

2 Connect the PLC to the PC with a USB cable.

3 On the PC, click the Unity Pro PLC\Set Address tab to bring up the Set Address

dialog box.

4 Select USB in the PLC Media box.

5 Leave the PLC Address field blank.

6 Click OK.

7 Proceed to Downloading and Running the Configuration Program (see Downloading

and Running the Configuration Program, p. 369).

CC Memory (KB)

Set Address

SETUP1.PRJ

236

Media

PLC

Address

USB

Communication Parameters

Simulator

Address

Media

127 . 0 . 0 . 1

TCPIP

Communication Parameters

Bandwidth

TestConnection

Cancel

Help