User manual

Installation and Configuration
33002479 06 07/2008 369
Downloading
and Running the
Configuration
Program
Once the PC and the PLC are physically connected (above steps), the I/O scanning
program can be downloaded to the PLC.
Step Action
1 On the PC, select PLC \Connect on the Unity Pro screen.
2 Click the PLC\Transfer Project to PLC tab to bring up the Transfer Project to
PLC dialog box.
3 Click the Transfer button to download the program to the PLC.
4 When the confirm screen appears, click OK.
5 Click Run on the Unity Pro upper toolbar to start the program.
CC Memory (KB)
Transfer Project to PLC
I
SETUP1.PRJ
236
PC Project
Transfer
Name
Version
Last Build
1/16/2007 11:17:23AM
Station
0.0.0
PLC Run after Transfer
Overwritten PLC Project
Name
Version
Last Build
12/17/2006 4:30:06PM
Station
0.0.10
Cancel
CC Memory ()
Stop
X
I
SETUP1.PRJ
OK
PLC Project:
Name: Station
Version: 0.0.10
Last Build: 12/17/2006 4:30:06 PM
Confirm Stop on this Project?
Cancel