User manual

Product Description
33002479 06 07/2008 37
Hot Standby
Order:
A or B
(modifiable
only if the key
switch is in the
unlocked
position)
FIRST Hot Standby Power Order
SECOND
Hot Standby
Transfer:
-
(this menu option is only enabled, if the
key switch is in the unlocked position)
Pressing the <ENTER> key
confirms the Transfer. The transfer
will initiate the request of a program
update from the primary CPU
controller. Pressing any other key
will cancel the Transfer initiation
and returns the Hot Standby
Transfer menu option screen to the
display.
Hot Standby
Diag:
Oder of diagnostic screen varies with the orperation.
Halt User’s task in halt mode
RIO fails Error reported by RIO head
HSBY fails Error reported by optical link
Stop Stop command ordered
Off keypad Offline commandentered on keypad
Off %SW60 Offline command set in command
register
Off appli Offline due to application mismatch
Off vers Offline due to PLC or Copro OS
mismatch
Off RIO Offline due to Remote IO error
Take over Standby CPU switched to primary
CPU mode
Run Run command ordered
Plug & Run Standby CPU plugged and started
Power up PLC has just started, no message
Screen Field Option Description