User's Guide

HeatTag Wireless Sensor for Early Detection of Overheating
Cables Presentation
Technical Characteristics
Electrical Characteristics
Characteristics Value
Conforming to standards • IEC 61010-1:2017 UL/CSA/EU
CENELEC deviations
• IEC 61010-2-201
• IEC/EN 61326-1
• FCC Part 15B and 15C
• ETSI/EN 300328
• ETSI/EN 301489-1
• ETSI/EN 301489-17
• IEEE 802.15.4
Supply voltage 110–277 Vac ±15%
HeatTag power supply protection 2 A circuit breaker, C curve
Frequency 50–60 Hz
Maximum consumption 0.1 A
Degree of pollution (IEC 60664-1) 3
Overvoltage category III
Operating frequency 2405–2480 MHz
Maximum radio-frequency power transmitted <10 mW
Physical Characteristics
Characteristics Value
Ambient temperature During storage -20 °C to +85 °C (-4 °F to 185 °F)
In operation -15 °C to +70 °C (5 °F to 158 °F)
Relative humidity During storage 5–95%
In operation 15–90%
Altitude of use 0–2000 m (0–6500 ft)
Dimensions (L x W x D) 108 x 90 x 55 mm (4.25 x 3.54 x 2.16 in)
Weight 270 g (2.5 oz)
Degree of protection (IEC/EN 60529) IP20
Sensors Characteristics
Characteristics Value
Temperature
measurement
Measurement range -15 °C to +70 °C (5 °F to 158 °F)
Measurement accuracy ±1.1 °C
Default transmission
period
30 s (higher in case of high wireless data
traffic)
Humidity measurement Measurement range 15–90%
Measurement accuracy ±9RH%
Default transmission
period
30 s (higher in case of high wireless data
traffic)
Air quality Index (0 to 10). Alert triggered when index
equal to 10.
Test alert after switching on During the first 30 minutes
12 DOCA0171EN-00