User Manual
Table Of Contents
- RFID OsiSense® XG
- Table of Contents
- Safety Information
- About the Book
- General Information
- Specifications and Physical Description
- Installing the System
- Operating Principles
- EtherNet/IP Communications Support
- Modbus TCP/IP Communications Support
- Web Server
- Diagnostics
- FAQs
- Glossary
- Index
Web Server DI[D-SE-0030818.1.7]
120 EIO0000001601 Draft 2013/07/17
Ethernet Ports Configuration
The ETHERNET PORTS CONFIGURATION page looks like this:
The procedure shows how to configure Ethernet ports:
SNMP Agent Configuration
The Smart Antenna includes an SNMP agent that can connect to and communicate with an SNMP
manager through the UDP transport protocol over ports 161 and 162.
Step Action
1 Select the Port Number to configure (1 or 2).
2 Select the Auto Negotiation mode (enabled or disabled).
3 Configure the following parameters if the Auto Negotiation is disabled:
” Speed
” 10 Mbit/s
” 100 Mbit/s
” Duplex Mode
” Half-duplex
” Full-duplex
4 Click Apply to confirm the new settings.