User Manual

General Information DI[D-SE-0029981.1.6]
16 EIO0000001601 Draft 2013/07/17
When considering the daisy chain topology, note that:
” Performing maintenance on any module not physically located at the end of the daisy chain—
for example, by removing the network cable, or by cycling power to the module—affects any
modules located down the chain from the maintained module.
” The embedded dual port Ethernet switch located in each module eliminates the need for
additional Ethernet switches.
1 M340 PLC
2 Ethernet switch
3 OsiSense XG Smart Antenna
Ring
You can create a ring topology by using a switch with redundancy management protocol (for
example ConneXium TCSESM043F23F0).
You can connect a series of up to 32 OsiSense XG Smart Antennas.
NOTE:
When considering the ring topology, note that:
” If a network segment becomes inoperable or is cut, all Smart Antennas remain operational.