User Instructions

63249-420-273A3 Clipsal® RF Gateway
02/2009 Instruction Bulletin
© 2009 Schneider Electric. All Rights Reserved. 19
STATUS INDICATOR
The indicator lights (LED) are in the infrared sensor at the
front/bottom of the RF Gateway.
Figure 8: Location of Status Indicators
The C-Bus indicator LED shows the status of the C-Bus network at
the unit. The table explains the meaning of each type of LED
activity.
Table 3: C-Bus LED Status
C-Bus LED Activity Meaning
Off No C-Bus connection or insufficient power
Slow flashing Normal connection to C-Bus network
Quick flashing Confirms that the RF Gateway has been linked to the
RF Wireless system. Lasts about 1 second after the
link is established.
The Learn indicator LED comes on during Learn Mode.