User Instructions

Clipsal® RF Gateway 63249-420-273A3
Instruction Bulletin 02/2009
4
© 2009 Schneider Electric. All Rights Reserved.
ABOUT THE RF GATEWAY
The Clipsal® RF Gateway provides a C-Bus™ protocol
communication bridge between a single Clipsal® RF wireless
system and a single C-Bus wired network.
Using the Gateway, Clipsal RF wireless systems and C-Bus wired
networks can communicate and interact with each other. The
Gateway requires C-Bus Toolkit for setup.
Both network types use the same C-Bus protocol commands.
The Gateway allows:
 Control of a RF wireless system by scheduling or inputting
controls from units on a C-Bus wired network or from software.
 Control of output units and electrical loads in one network type
from input units in the other network type.