User Instructions

Clipsal® RF Gateway 63249-420-273A3
Instruction Bulletin 02/2009
8
© 2009 Schneider Electric. All Rights Reserved.
INSTALLATION INSTRUCTIONS
The RF Gateway can be installed horizontally or vertically. Either
installation should allow for access to the Learn button on the base
of the unit.
If placing the unit horizontally, you may attach the adhesive feet
(provided) to the base of the unit to prevent the unit from sliding or
scratching the surface.
If mounting the device on a wall, use the keyhole cutouts on the
base of the unit. These have 1.6 inch (40 mm) mounting centers.
Position the antenna for desired reception.
To remove the unit from the wall, slide it up and pull it off of the
screws.
Figure 2: RF Gateway Orientation