User Instructions

Clipsal® RF Remote Control 63249-420-278A3
Instruction Bulletin 02/2009
10
© 2009 Schneider Electric. All Rights Reserved.
Battery Tips and Precautions
Use new AAA batteries and verify that all batteries are the same
type.
Keep batteries out of the reach of children.
Verify that the positive (+) and negative (–) battery polarities line
up with the battery-case polarities.
Replace batteries that have been in use two or more years.
Recycle or properly dispose of used batteries.
Try changing the batteries if your remote does not control units.
The remote’s range decreases when the batteries’ power is low.
NOTE: The Remote Control will not lose programmed data when
the batteries are replaced.
FIRE OR CHEMICAL HAZARD
The batteries used in this unit may present a risk of fire or chemical
burn if not handled properly.
Do not recharge, disassemble, heat above 212 °F (100 °C), or
incinerate.
Recycle or properly dispose of used batteries.
Replace with identical type.
Follow all battery manufacturers' instructions.
Failure to follow these instructions can result in injury or
equipment damage.