User Instructions

Table Of Contents

Clipsal® RF Remote Control 63249-420-278A3

Instruction Bulletin 02/2009

CLEARING REMOTE ASSIGNMENTS

To clear an individual remote assignment learned by a specific

button on a wall unit or plug adapter unit, reassign the same remote

button to the wall unit or plug adapter button. Assigning a button

once programs it. Assigning it again clears it.

To clear all remote assignments (from all remote controls) learned

by an individual wall unit or plug adapter unit:

1. Set the C-Bus Wireless Remote Control to learn mode by sliding

the switch across to the Learn position.

2. On the wall unit or plug adapter unit, press the learn button to

activate learn mode.

3. Press one of the five assignable buttons on the right side of the

remote control.

4. Press twice one of the buttons on the wall unit or plug adapter

unit.

5. Wait until the indicator lights return to a slow alternating flash.

Then press the learn button on the wall unit or plug adapter to

exit learn mode.

6. Slide the learn mode switch on the back to the Use position.

CARE AND CLEANING INSTRUCTIONS

Follow the precautions below to properly clean and care for the unit.

 Clean regularly using a soft lint free cloth.

 Only use a mild, non-abrasive cleaner such as window cleaner

lightly sprayed onto the lint free cloth to clean the unit.

 Ensure hands are dry and clean before operating the unit.

 Only use non-abrasive objects to operate the unit. Hard, sharp

objects may cause damage.

 Leave the unit uncovered to allow adequate ventilation.

 Only use the unit indoors.

 Properly shade the unit so that it is not exposed to direct sunlight

for extended periods.