User Instructions

Clipsal® RF Remote Control 63249-420-278A3
Instruction Bulletin 02/2009
4
© 2009 Schneider Electric. All Rights Reserved.
ABOUT THE RF WIRELESS REMOTE CONTROL
The Clipsal
®
RF Wireless Remote Control provides C-Bus™
protocol commands to control buttons on Clipsal RF wireless wall
units and plug adapter units.
It is a radio frequency (RF) remote control that works up to 49 to 70
feet (15 to 20 meters) from a unit it controls. Unlike an infrared
remote, which operates on line-of-sight, an RF remote signal cannot
be blocked by obstructions. The user can control the unit by pointing
the remote in any direction, including away from the unit.
Up to ten separate wall units or plug adapter buttons can be
controlled by the remote control unit. The buttons can be on various
units on different wireless networks. A single button on a wall unit or
plug adapter unit can be controlled by up to two RF remote controls.
About Clipsal
®
RF Wireless Systems
Clipsal
®
RF Wireless Wall Units include Switches, leading edge
Dimmers, and Scene Controllers. The units are designed to replace
standard wall switches and dimmers. Each Switch and Dimmer
controls one load (lights or other appliances connected to its output).
Wall Units can be operated by RF Wireless remote control, and
have learn and scene capability.