User Instructions

63249-420-278A3 Clipsal® RF Remote Control
02/2009 Instruction Bulletin
© 2009 Schneider Electric. All Rights Reserved. 9
INSTALLING THE BATTERIES
To install the 2 x AAA batteries provided:
1. On the back of the remote, press the tab and slide the back
cover down to release.
2. Insert the batteries. Verify that the positive and negative
terminals match the symbols inside the battery compartment.
3. Replace the back cover by positioning the cover and sliding it up.
Figure 5: Removing the Back Cover
KEY:
A. Press the tab to
release the back cover
B. Slide down