User's Manual

C-Bus™ RF Wireless Key Fob and Visor Remote 63249-420-342A1
Instruction Bulletin 06/2010
10
© 2010 Schneider Electric. All Rights Reserved.
CLEARING REMOTE ASSIGNMENTS
To clear an individual remote assignment learned by a specific
button on a wall unit or plug adapter unit, reassign the same remote
button to the wall unit or plug adapter button. Assigning a button
once programs it. Assigning it again clears it.
To clear all remote assignments (from all remote controls) learned
by an individual wall unit or plug adapter unit:
1. Set the remote control to learn mode by sliding the switch across
to the Learn position.
2. On the wall unit or plug adapter unit, press the learn button to
activate learn mode.
3. Press one of the assignable buttons on the remote control.
4. Press twice one of the buttons on the wall unit or plug adapter
unit.
5. Wait until the indicator lights on the wall unit return to a slow
alternating flash. Then press the learn button on the wall unit or
plug adapter to exit learn mode.
6. Slide the learn mode switch on the back to the Use position.