User's Manual

63249-420-342A1 C-Bus™ RF Wireless Key Fob and Visor Remote
06/2010 Instruction Bulletin
© 2010 Schneider Electric. All Rights Reserved. 7
Visor Remote Battery Installation
1. Using a small Phillips screw driver, remove the two screws from
the back of the visor remote.
2. Remove the back of the visor remote.
3. Remove the old battery from the visor remote.
4. Insert the new battery. Verify that the positive and negative
terminals match the symbols inside the battery compartment.
5. Replace the back cover by positioning the cover and snapping it
into place.
6. Tighten the screws on the back of the visor remote.
Figure 2: Removing the Visor Remote Battery