InsightFacility Manual
Table Of Contents
- Safety Information
- Audience
- About
- Overview
- Installation
- Getting Started
- Configuring Devices
- Monitoring
- Troubleshooting
- Specifications
- Installing the InsightFacility Security Certificate
Choosing a Location
Figure 6Location choices
50mm
50mm
50mm
50mm
n Choose a clean, dry, easily accessible location indoors.
n If you mount the InsightFacility on a wall, the recommended height is at eye-level
so that you can clearly see the LED indicators and have easy access to the data
and communication ports.
n All of the ports on the InsightFacility are accessible from the sides of the device
when mounted on a wall or DIN rail. Clearance of at least 2 inches (50 mm) around
the device is needed to allow for the bending radius of cables that connect to the
InsightFacility.
n You should not run cables through conduits that can be exposed to lightning
strikes. The following are recommended maximum cable lengths in a
InsightFacility system:
l 131 feet (40 m) Total Xanbus network
l 328 feet (100 m) Router to InsightFacility
l 164 feet (50 m) Modbus Master (RS 485) to InsightFacility
InsightFacility Owner's Guide Installation
23 990-91411A