InsightFacility Manual

Connecting the InsightFacility to the Internet
Before connecting a computer and router to the InsightFacility, make sure it meets the
following prerequisites.
n Microsoft® Windows® 7 or later
n Mac OS® X 10.4.8. or later
n Google Chrome™ 78.x or later
n Microsoft® Windows® Internet Explorer® 11.476 or later
n Safari® 5.x or later
n JavaScript and cookies must be enabled in your web browser.
n Router - the network router must be able to supply DHCP addresses automatically to
connected devices. If your network router does not support automatic DHCP, refer to
your network router’s user guide or contact your system administrator.
To connect the InsightFacility to a Computer on an Ethernet Network:
NOTICE
EQUIPMENT DAMAGE
n Do not connect an Ethernet cable from the InsightFacility to the MODEM port on the
network router.
n Do not connect an Ethernet cable plug into a Xanbus port on the InsightFacility.
Failure to follow these instructions can result in equipment damage.
1. Make sure the computer and network router are turned on and the InsightFacility is
not turned on. Make sure the network router selected has DHCP enabled.
2. Connect one end of an Ethernet cable to the computer’s network port.
3. Connect the other end of the Ethernet cable to a vacant Ethernet/LAN port on the
network router.
4. Connect one end of the Ethernet cable (supplied) to the LAN port on the network
router.
5. At this stage, the network router should be on, but the LED showing port activity on
the router will not show any indication.
6. Connect the other end of the Ethernet cable to the InsightFacility.
7. At this stage, the Ethernet cable should be the only cable plugged into the
InsightFacility.
InsightFacility Owner's Guide Installation
27 990-91411A