InsightFacility Manual
Table Of Contents
- Safety Information
- Audience
- About
- Overview
- Installation
- Getting Started
- Configuring Devices
- Monitoring
- Troubleshooting
- Specifications
- Installing the InsightFacility Security Certificate
4. Observe the LED indicators and wait for the Power LED to light up (solid). The
InsightFacility is now turned on.
5. Proceed to "Logging in to the InsightFacility Web Application" on page37.
Turning Off the InsightFacility
To turn off the InsightFacility:
n Press the Power button according to the settings in Table 1 on page 17 or use the web
user interface to shut down the unit and turn it off.
Figure 10 Power button
Power Cycling
To power cycle the InsightFacility:
1. Turn the InsightFacility OFF.
a. Press and hold the Power button according to the settings in Table 1 on page
17 or use the web user interface.
b. Remove the power connections to the InsightFacility.
2. Wait ten seconds before the next step.
3. Ensure that there is no USB thumb drive inserted in the USB Host port.
4. Turn the InsightFacility ON.
a. Plug and connect the InsightFacility to a power source.
Installation InsightFacility Owner's Guide
990-91411A 30