InsightFacility Manual

(see Using the InsightFacility Web App via Wi-Fi Access Point (AP)). NOTE: Wi-Fi
Station cannot be used unless the LAN cable is disconnected.
To enable Wi-Fi Station:
1. Go to Setup > Network > Network settings.
2. Select your network. If you do not see your network, go to step 4.
3. Enter the network password. When you enter the correct password, the network
name and icon will turn green and move to the top of the list, and a green checkmark
will appear beside the name. NOTE: If you have an Ethernet cable plugged in, the
checkmark will remain beside Ethernet connection, and you will not be able to
successfully connect to the network you selected in step 2. Unplug the Ethernet
cable, connect your device via the Wi-Fi Access Point, and repeat the steps above.
Figure 12Wi-Fi Station connection
4. If you do not see your network, add the network manually:
a. Below the list of networks, click Add Network manually.
Figure 13Adding a network manually
b. Enter the SSID (network name).
Getting Started InsightFacility Owner's Guide
990-91411A 34