InsightFacility Manual

Logging in to the InsightFacility Web Application
1. If you have connected the InsightFacility via Wi-Fi Access Point, go to the IP
address https://192.168.100.1 to access the web user interface.
2. If you have connected the InsightFacility via Ethernet or Wi-Fi Station, use the
following steps:
a. Insert a blank USB drive into the InsightFacility USB port.
Ensure there are no firmware upgrade files on this USB drive.
b. After the InsightFacility beeps twice, remove the USB drive.
c. Insert the USB drive into your laptop USB port.
d. Copy the HTML file to your laptop.
e. Remove the USB drive from your laptop.
f. Open the HTML file and click the link to the IP address of the InsightFacility.
3. Bookmark this address. Important: The web address is a locally and privately
assigned (LAN) device address that is also protected by a firewall.
4. Select your User Name. Select Admin.
NOTE:A maximum of two Admin users can be logged in to one InsightFacility at the
same time. For more information, see User Access Levels.
5. Enter your Password. The initial password is Admin123.
6. Important: When prompted, change the initial password immediately to protect the
device from unauthorized users and to enable changes to device settings.
NOTE: To perform adminstrative functions such as a firmware update, set User
Name to Admin. Settings are disabled until the initial password is changed.
InsightFacility Owner's Guide Getting Started
37 990-91411A