InsightFacility Manual

5. Enter the Confirm password.
6. Click Apply. Your settings will be immediately applied.
Changing InsightFacility Settings
The procedures for configuring the other InsightFacility Settings are described in the
following sections.
To change InsightFacility settings:
1. In the main menu bar, click Setup>Configuration.
The Configuration settings appear in the main display area.
2. Click any of the following settings.
l Plant setup - see Plant Setup on page 41
l Time setup - see Changing the Time on page 42
l Import & export settings - see Import and Export Settings on page 42
l Units - see Units on page 43
l Modbus settings - see Connecting and Configuring Modbus Devices on page
51
l Restart InsightFacility - see Restarting the InsightFacility on page 44
l Install package - see Install Package on page 44
3. With only a few exceptions, you may save a setting by clicking Apply or ignore
changes by clicking Cancel.
That portion of the window expands to display the change options for that setting. The
size and content of the expanded window varies depending on the setting type.
Plant Setup
It is recommended to name the plant site to distinguish it from other installations in your
power system.
Figure 17 Plant setup screen
To enter plant information:
1. Click Setup > Configuration> Plant setup.
2. Enter a Friendly name. Choose a name that can easily identify the plant site to your
customers.
InsightFacility Owner's Guide Getting Started
41 990-91411A